What should the tire pressure be on a 3500 diesel?
The front tires should always carry more unloaded since they have the weight of the engine over them (a guess would be 4100 to 4500# unloaded on the front axle). The rear…maybe another 3500-4000# unloaded. So…maybe 50-55 psi front and 45-50 psi rear…
What should the tire pressure be on a Chevy 1500?
I recently (3 months ago) purchased a 2015 chevy hd2500 4×4 crew cab and i love this truck. I have had 2 other chevy 1500, this is my first 3/4. The sticker on the door recommends 60 psi in the front and 80 in the back for the stock tires.
What’s the Max psi for a rear load tire?
Recommended 65 psi max for the rear fully loaded. The load rating for this tire and size is the same at 65 as it is at 80. Powered by phpBB © phpBB Group. phpBB Mobile / SEO by Artodia .
What should the tire pressure be on a 5th wheel truck?
And load up when loaded or towing 5th wheel. I pull a gooseneck trailer that can be loaded for a total trailer weight of over 14,000 lbs giving my truck somewhere around 2000lbs of pin weight. In those times, the rear tires pressure is 80psi. All other times I bring it down to about 55-60psi. I always leave the fronts at 60psi.
What causes bad steering on a GM Duramax?
Lift kits, larger tires and upgraded/high horsepower engines put increased strain on the steering system; much more than OEM was designed to handle. Common failure points on for the front end results in sloppy steering, broken tie rods, and the front wheels toeing-in under load while in four-wheel drive.
How can I lower the tire pressure on my Duramax?
You can outsmart your TPMS and GM by setting it for rears on the front, front on the rears, then you can run lower PSI on the rears. Just start the resetting on the right rear, ( instead of left front) going clockwise then ending on the right front, ( instead of the left rear).
What kind of steering stabilizer does a Duramax use?
46mm Monotube Steering DamperBilstein 5100 Series Steering Stabilizers utilize the same high gas pressure monotube design found in our shock absorbers, offering instantaneous response to suspension inputs. These steering stabilizers feature digressive valving, reducing vibration and wear and tear on steering components.
Where to set the TPMs on a GMC Duramax?
Look in your manual it should explain how to re-set the TPMS to the proper locations. You can outsmart your TPMS and GM by setting it for rears on the front, front on the rears, then you can run lower PSI on the rears.