Why Is My Passport external hard drive not working?
If the WD Passport drive shows up, it is the damaged USB hub that stops WD from showing up. If the WD passport is not detected either on your current or the new PC, replace the WD drive with a new one.
How do I fix my WD external hard drive not recognized?
Locate and right-click on your WD drive and click Change Drive Letter and Paths…. Click Change. Then select from the drop-down menu to assign a letter and click OK. Restart your computer and check if your WD external hard drive not recognized problem has been solved.
Why is my WD elements not recognized?
If it shows but it does not show a drive letter, make sure you give it one. Also, try to connect the drive to a USB port in the back of the computer, avoid using a USB hub. You can also try uninstalling the usb driver and once you restart the computer, the drivers should get reinstalled by the operating system.
Why is my WD hard drive not working?
Here are some possible reasons for a WD hard drive not recognized: A hardware problem (damaged components such as a scratched platter or a failed headstack) File system corruption of the hard drive partition. Issues with a hard drive partition.
How do I fix my hard drive not reading?
Here are a few troubleshooting steps you can take to remedy the situation.
- Make Sure It’s Plugged In and Powered On. Western Digital My Book.
- Try Another USB Port (or Another PC)
- Update Your Drivers.
- Enable and Format the Drive in Disk Management.
- Clean the Disk and Start From Scratch.
- Remove and Test the Bare Drive.
How do I fix a hard drive that is not detected?
Unplug the hard drive which fails to be recognized by Windows BIOS, and remove the ATA or SATA cable and its power cable. If the ATA or SATA cable and the power cable are broken, change to a new one. If the cables are covered by dust, clear the dust.
How do I fix hard drive not detected?
Step 1 – Make sure the SATA cable or USB cable is tightly connected to the internal or external drive and SATA port or the USB port on the computer. Step 2 -If that doesn’t work, try another SATA or USB port on the computer’s motherboard. Step 3 – Try connecting the internal or external drive to another computer.
What do I do if my hard drive is not detected?
1. What do I do if my internal hard drive is not detected?
- 1). Change the hard drive letter;
- 2). Recover lost partition data, and create new partitions;
- 3). Update hard drive driver;
- 4). Check hard drive connection, enable it in BIOS.
How do I fix a corrupted hard drive?
Steps to Repair Corrupted Hard Disk without Formatting
- Step 1: Run Antivirus Scan. Connect the hard drive to a Windows PC and use a reliable antivirus/malware tool to scan the drive or the system.
- Step 2: Run CHKDSK Scan.
- Step 3: Run SFC Scan.
- Step 4: Use a Data Recovery Tool.
What causes a hard drive not to be detected?
If your new harddisk is not detected by or Disk Manager, it could be because of a driver issue, connection issue, or faulty BIOS settings. These can be fixed. Connection issues can be from a faulty USB port, or a damaged cable. Incorrect BIOS settings may cause the new hard drive to be disabled.
Why is my new HDD not being detected?
The BIOS will not detect a hard disk if the data cable is damaged or the connection is incorrect. Serial ATA cables, in particular, can sometimes fall out of their connection. The easiest way to test a cable is to replace it with another cable. If the problem persists, then the cable was not the cause of the problem.
Why is my WD my passport not opening?
My WD My Passport won’t appear in My Computer. It is on the Device Manager and Disk Management. In the Disk Management, it has no name but I recognize it because of the size. The Disk Management says that it is healthy.
What to do if WD backup won’t launch?
Also, uninstalled and removed WD directories, and checked several Services were set to AUTO as instructed by ‘Support’. After all of this, they sent me to 2nd Tier Support recently.
How to fix WD external hard drive not responding?
Fix WD external hard drive not working/responding issue 1 Click on Start > Type: devmgmt.msc in Search to open Device Manager by hitting Enter. 2 Expand Universal Serial Bus controllers > Right-click every USB device found there and select Uninstall. 3 Then check out whether any devices show up as unrecognized or not:
Why is the WD app not working on my computer?
Without the WD app working, its just a dumb USB drive. Same thing…and they won’t address this issue on Twitter.