How do you reset the service interval on a Mercedes?
Press the “Down” button until you highlight “Service due.” Press the “OK” button. Press the “Down” button until you highlight “Full service.” Press the “OK” button. This should reset your service indicator light.
How do I reset the service light?
DIY service indicator reset
- Get in your car, close all the doors.
- Press and hold the trip reset button on the instrument panel.
- Turn the ignition on, all the lights come on but do not switch the engine on or put your foot on any pedals.
- This step is where some cars may differ.
- Turn ignition off.
How do you reset the service light on a 2003 Ford?
How to reset service light indicator Ford Galaxy.
- With the ignition off, press the reset button under the mileage counter.
- Hold in reset button whilst turning the ignition on After about 4 or 5 seconds (up to 30 seconds in some cases) the display should reset itself.
How can I reset the service reminder interval?
There is two ways to reset the service reminder interval. One is to use the steering wheel buttons and access the instrument cluster menu. The second method is to use a OBD II scanner such as the iCarsoft MB II which allows you to reset the service intervals on most Mercedes-Benz models.
How to reset service interval on Mini Cooper?
1 Press and hold the Trip Button 2 Insert key and turn to position 1 3 Watch for RESET to appear 4 Release the Trip Button, then press & hold it again 5 Wait for the RESET to flash 6 Release the Trip Button, and then press & release (once only) 7 Service interval should then be reset to next interval
How to reset the service light on a Volvo S40?
For reset the oil service light/message indicator in your 2004 to 2013 Volvo V50 and s40 or 2006 to 2013 Volvo C30 and C70, is very simple. Step 1. Turn key to position 1 Step 3. With the trip reset button still pressed, turn the key to position 2. Step 4. Keep the trip reset button pressed until the yellow [i] light start blinking.
How to reset service intervals on Mercedes Benz?
Instructions on how to do that on several different models are shown below. The second method is to use a OBD II scanner such as the iCarsoft MB II which allows you to reset the service intervals on most Mercedes-Benz models. The Service A maintenance appointment will include the following tasks: