What causes a Volkswagen Golf GTI to rattle?
The rattle is caused by the wastegate actuator rod rubbing back and forth on the wastegate and can be quite annoying. Unfortunately, this is just a manufacturing fault. This rattle can occur on start-up, while idle, or while accelerating from 1800-3000rpms. Now as the TSB above states, VW only covers 2008 – 2010 MK6 GTIs.
When to change tensioner on Volkswagen Golf GTI?
Volkswagen’s maintenance schedule recommends getting the tensioner changed every 120,000 miles, but some MK6 GTI owners have seen them go out as early as 20,000 miles. Rattling noise coming from the engine bay after start
What kind of engine does a Volkswagen GTI have?
More specifically, the 2.0T TSI engine was found in the Volkswagen GTI, Jetta, Passat, CC, Eos, Tiguan, and Beetle, in addition to being found in the Audi A3 and MK2 TT. While we like to say that every engine is generally reliable when properly taken care of, the 2.0T TSI engines do have a laundry list of known common problems.
What are the problems with the 6th gen Golf GTI?
Common 6th Gen (MK6) Volkswagen Golf GTI Engine Problems 1 Water pump failure 2 Ignition coil pack failure 3 Timing chain tensioner failure 4 Carbon buildup on the intake valves 5 Wastegate rattle 6 Positive Crankcase Ventilation (PCV) failure
When did the Volkswagen Golf GTI come out?
Production runs on the MK6 GTI, ran from late 2008 – 2013 in Europe and early 2009 – 2014 in the US. Under the hood, the MK6 GTI features a 2.0t TSI engine (CCZB) with a K03 BorgWarner turbocharger that puts down 210 hp & 207 lb-ft.
Why is my VW Mk6 GTI timing chain skipping?
Volkswagen acknowledged that the tensioner was of poor quality and issued a recall, but this is what you should be looking for when shopping for a MK6 GTI. When the timing chain tensioner fails, the timing chain can skip due to improper tension, which would cause unwanted contact between the piston and valves.
Why does my VW engine make a rattling noise?
The technical background on this issue is that the timing chain tension has lost its ability to keep the tension and the slack causes the rattle in the engine. Thus, the timing chain may jump, causing the engine not to start. If this happens, it may have contact between the pistons and valve, causing major repair problems for the engine.
Are there any mechanical problems with the VW VR6?
The engines also have more lag time than competitors and successive versions, including the VR5. Common mechanical problems include cooling system issues and leaking head gaskets. The spark plugs and wires can also wear out quickly. If they’re not replaced in time, this can cause the engine to misfire.
Why does the EPC light come on on my Volkswagen Golf GTI?
Epc light is mostly known to come on when there is emissions probelms. Could be Lambda probe sensor (o2) on cat. 41 people found this helpful. the check engine light deals with emission related problems. if there is a loss in engine power then thats when the epc light comes on.