Can I plug my cable directly into my TV?
Just plug the coax cable directly into the TV. But first, you need to do a channel scan with your TV to find all the basic tier stations. When you do the channel scan, be sure to set the TV to “CABLE”, not “OFF THE AIR”.
What does the TV cable do on a 700R4?
The TV cable on the 700R4 and 200-4R transmissions controls line pressure, shift points, shift feel, part throttle downshifts, and detent (full throttle) downshifts. So if the TV cable is not adjusted properly, it can cause numerous transmission problems. The TV cable is connected to and operates the throttle lever,…
How to adjust throttle valve cable on 700R4?
This information applies to all 700R4, 4L60 and 200-4R transmissions. Throttle valve cable adjustment instructions, numbers 4, 5 and 6. #1. The button that the cable hooks to at the carburetor or throttle body must have approximately 1 and 3/32-inch radius from the center of the throttle shaft to the center of the button the cable hooks to.
Can you change shift feel on 700R4 cable?
Many people try to defeat the self-adjusting TV cable and tailor shift points of shift feel. However, remember that on the 700R4 and 2004R Transmission the TV cable controls both shift feel (clutch apply pressure) and shift points, you therefore cannot alter one without altering the other.
How to adjust cable on Art Carr 700R4?
1. Stop the engine. 2. Depress the adjusting tab and move the slider back through the fitting away from the carburetor until it stops. 3. Release the adjustment tab. 4. Move the throttle linkage to rest against the full throttle stop, then release it .
The TV cable on the 700R4 and 200-4R transmissions controls line pressure, shift points, shift feel, part throttle downshifts, and detent (full throttle) downshifts. So if the TV cable is not adjusted properly, it can cause numerous transmission problems. The TV cable is connected to and operates the throttle lever,…
Many people try to defeat the self-adjusting TV cable and tailor shift points of shift feel. However, remember that on the 700R4 and 2004R Transmission the TV cable controls both shift feel (clutch apply pressure) and shift points, you therefore cannot alter one without altering the other.
This information applies to all 700R4, 4L60 and 200-4R transmissions. Throttle valve cable adjustment instructions, numbers 4, 5 and 6. #1. The button that the cable hooks to at the carburetor or throttle body must have approximately 1 and 3/32-inch radius from the center of the throttle shaft to the center of the button the cable hooks to.
Why do I need TV cable corrector for GM 200C?
GM 200C and 200-4R have a different amount of cable travel than the GM 700R4 and 4L60 and Ford AOD Transmissions. A properly functioning TV system is critical for transmission line rise and shift timing. Incorrect cable travel results in improper setting of TV cable adjustments, leading to incorrect pressures and shift timing.