Do you need a trans for a 1994 4L60E?
It is not a direct bolt up to your trans. You will need a different flex plate & spacer. I am not sure on the wiring if the plugs are the same & if the 99 computer will run the older 4l60E. Since your trans came from V6, I would go with a 99-up V8 truck trans.
Can a 4L60E be swapped for a 5.3L?
Hi, im planning on swapping a 5.3L into my 94 Chevy 1500 that originally came with a 4.3L. I already have a complete wiring harness and some other parts from a 99 Chevy truck that had a 5.3.
Can a 4L60E bellhousing be used on a Gen i engine?
The 4L60E bellhousing can bolt to either engine, although you may need an adapter to get a Gen III transmission to bolt to Gens I and II and vice versa. For the purposes of easy identification, we have broken the 4L60E into 4 distinct eras. These eras are easy to identify from the outside of the transmission.
Is the Pan bolt pattern the same on all 4L60E transmissions?
The transmission pan bolt pattern is the same, regardless of the year that the 4L60E was made. They have the same gearing, regardless of what year or model that they are from, so you don’t need to worry about that. One of the main differences in the earlier and later 4L60E transmissions is the bellhousing area.
When did the 4L60E 700R4 transmission come out?
The one-piece case 4L60E was produced from 1993 through 1997. This is the easiest way to identify it. The 4L60 is the latter model 700R4 transmission, only the name changed, if you think you may have a 700R4 look here to identify it.
The 4L60E bellhousing can bolt to either engine, although you may need an adapter to get a Gen III transmission to bolt to Gens I and II and vice versa. For the purposes of easy identification, we have broken the 4L60E into 4 distinct eras. These eras are easy to identify from the outside of the transmission.
What kind of transmission does a 1994 Chevy Silverado have?
I have a 1990 GMC 1500 4×4 z71 with 5.7 and auto/ overdrive transmission that is shifting hard. Revs to high from 25mph- until it shifts at 35mph. New fluid/ filter and it is full. After that it drive … read more i have a 1994 chevy z71, and it won’t go into reverse.
What’s the difference between a 4L60E and a 96-99?
These have the classic 6 bolt bellhousing like the other classic transmissions that came before it. This version, as well as the 96-99 4L60E use a 298mm input shaft /torque converter. The major difference between the two-piece case 4L60E versions, is that the bellhousing bolts have slightly different patterns.