How do I fix error code P2649?

How do I fix error code P2649?

What repairs can fix the P2649 code?

  1. Replacing the ‘A’ rocker arm actuator.
  2. Repairing the wiring harness or connector to the actuator.
  3. Following the manufacture pinpoint test to isolate faults in the system.

Does the 2003 Honda Accord V6 have VTEC?

The LX Coupe V6 comes with a 5-speed automatic…

What is the p2647 error code for Honda?

As soon as the tachometer touched 2700 rpm, the car bucked and the check engine light (CEL) came on! Luckily I had my trusty engine code reader handy, so I pulled over and read the error code. The error was P2647. A related error is P2646. P2647 – Rocker Arm Actuator Control System Stuck On

Why do I have a p2649 code on my car?

Code P2649 is not a very common code since most vehicles do not have actuators for the rocker arms of the engines they manufacture. The actuators are the most common failure that causes the short in the circuit causing the code. Need help with a P2649 code?

How much does it cost to repair a Honda Accord p2649?

Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost of diagnosing the P2649 HONDA code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

What are the common causes of code p2647?

What are the common causes of code P2647? 1 Low engine oil level or oil pressure condition 2 Defective VVT/VTEC pressure switch 3 Faulty rocker arm actuator 4 Broken or loose rocker arm 5 Open/shorted wiring/connector in the rocker arm actuator circuit

What is the pressure switch on a Honda p2647?

P2647 HONDA | Rocker Arm Oil Pressure Switch Circuit High Voltage | The VTEC system activates the rocker arm oil control solenoid (VTEC solenoid valve) by command from the engine control module (ECM)/powertrain control

Code P2649 is not a very common code since most vehicles do not have actuators for the rocker arms of the engines they manufacture. The actuators are the most common failure that causes the short in the circuit causing the code. Need help with a P2649 code?

Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost of diagnosing the P2649 HONDA code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

What is the p2647 error code for Honda Accord?

The check-engine-light came on and gave a P2647 error code. This post walks step-by-step through the easy fix. I hope you find this helpful! The vehicle I am working on here is a 2004 Honda Accord (4-cyl).