How do I reset my IQAir filter?
Just in case you have lost the manual like one of our customers, this is how you reset the filter lights
- Press the menu button (7 times) until you get to where the display says new filter.
- Press the enter button and hold it down for 3 seconds and a number 1 will be flashing after the words new filter on the display.
How do I activate IQAir?
Plug the connector-end of the power cord into the base of the system. Locate a suitable wall socket and connect the power cord. Your IQAir system is now in standby mode ready to be switched on. To switch the system on or off, simply press the POWER button, located on the far left of the control panel.
How long does IQAir filter last?
The short answer is that your IQAir HyperHEPA filters should be replaced about once every four years for maximum performance and efficiency.
Does IQAir come with filters?
It also features an odor filter and pre-filter that eliminate odors, VOCs, pet dander, and pollen. Here is an in-depth look at IQAir HealthPro Plus air purifier features. The air purifier comes with a 3-stage filtration system. It’s composed of a pre-filter, a V5-Cell gas and odor filter, and a HyperHEPA filter.
How long does IQAir HEPA filter last?
What does orange light mean on air purifier?
The orange light will flash when the filter needs replacement. In order to reset the light: 1. After the filter is replaced, press and hold “Air Purifier” button for 7 seconds.
Should I leave my air purifier on all the time?
Every time you turn off the purifier, pollutants begin to accumulate again, making it more difficult for the purifier to do its job. Leaving the air purifier on continuously will allow new contaminants to be removed as they are introduced.
Does IQAir really work?
IQAir HealthPro Plus is effective against ultrafine particles, which float in the air for a long time. The medical-grade HyperHEPA filter can remove 99.5% of microparticles of 0.003 to 1.0 microns range….IQAir HealthPro Plus Specifications:
| Parameter | Value |
|---|---|
| Maximum CADR | 300 cubic feet per minute (cfm) |
Is IQ air any good?
IQAir HealthPro Plus can capture 100x smaller particles than a True HEPA filter, and it about 30x more thorough than medical-grade H13 HEPA filters. Drawbacks: This unique Swiss-made air purifier has a higher price, obviously. Overall, it’s one of the best air purifiers, clearly worth the cost.
What does yellow light mean on air purifier?
The yellow LED is the carbon filter light that indicates if the carbon pre-filter needs to be changed. Carbon filters need to be replaced every 3-6 months. Filter life will vary depending on air quality and usage.
How to set up an IQAir air cleaner?
Chapter 1 Setting Up Your IQAir Cleaner Chapter 1 Setting Up Your IQAir Cleaner 1.1 Unpacking Your Air Cleaner To unpack your air cleaner, open the top of the box and remove the square styrofoam pad. Lay the box on its side, hold the air cleaner by the handle and pull it out of the box.
How to remove protective film from IQAir cleaner?
Power outlet… 1.4 Removing the Protective Film from the LCD Display A removable film protects the LCD display on some IQAir cleaner models. This film should be removed to enable clear viewing of the LCD. To take the protective film off, loosen it first on one corner with your finger and then remove it entirely.
Where is the display language menu on IQAir?
To reach the Display Language Menu from the main display window, press the Menu key eight times. Chapter 4 Using the Remote Control In addition to the control panel, your IQAir cleaner can also be controlled by using the hand-held remote control.
Where can I Register my air purification product?
Register your air purification product by completing the quick and easy Online Registration Form.