How do I reset myGMC Yukon?

How do I reset myGMC Yukon?

How reset oil light GMC Yukon

1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. If the Change Oil Soon light flashes the system is resetting.

Why does my GMC interior lights not turn off?

It will be in that area and is a button with a lamp or beam on it. Yeah that is the override button to shut the dome lights off when you have the tailgate or doors open for any length of time. A door sensor can be stuck also thinking a door is open.

When do the park lights turn on in a GMC?

When the ignition switch is turned to the RUN position, the radio VF display turns ON at maximum brightness. When the park lamps are ON, all incandescent back lighting turn on at the dimming level indicated by the instrument panel (I/P) dimmer switch. At the same time all VF displays dim to match the indicated dimming level.

Where is the ground on a GMC Yukon?

Ground is provided to the right middle and right rear door at G306. Ground is provided to the left middle and left rear door at G302. When the driver uses the door key in order to unlock the doors, the BCM receives a door unlock signal.

Where are the courtesy lights on a GMC?

The left and right front door courtesy lamps are controlled, and receive voltage and ground from the drivers door module (DDM) and the passenger door module (PDM) respectively. The body control module (BCM), DDM, and the PDM communicate through class 2 serial data for the lamp illumination commands and the door ajar switches.

It will be in that area and is a button with a lamp or beam on it. Yeah that is the override button to shut the dome lights off when you have the tailgate or doors open for any length of time. A door sensor can be stuck also thinking a door is open.

When the ignition switch is turned to the RUN position, the radio VF display turns ON at maximum brightness. When the park lamps are ON, all incandescent back lighting turn on at the dimming level indicated by the instrument panel (I/P) dimmer switch. At the same time all VF displays dim to match the indicated dimming level.

Ground is provided to the right middle and right rear door at G306. Ground is provided to the left middle and left rear door at G302. When the driver uses the door key in order to unlock the doors, the BCM receives a door unlock signal.

The left and right front door courtesy lamps are controlled, and receive voltage and ground from the drivers door module (DDM) and the passenger door module (PDM) respectively. The body control module (BCM), DDM, and the PDM communicate through class 2 serial data for the lamp illumination commands and the door ajar switches.