How do you reset a DVD?
On the DVD remote control, press the UP ARROW or DOWN ARROW button to select the SETUP icon. Press the ENTER button. Press the UP ARROW or DOWN ARROW button to select RESET . Press the ENTER button.
Why is my DVD player on my computer not working?
For internal DVD drives on desktop systems, the adventurous could remove the cover and try connecting a different power plug from the power tray. If the DVD drive starts to work, then there is a problem with the PC’s power supply to the DVD drive. If it doesn’t, then the DVD drive is not powering up.
What should I do if my DVD drive does not power up?
If it doesn’t, then the DVD drive is not powering up. If the DVD drive remains dead and you know it is getting power, then it is probably time to buy a new DVD drive or schedule a repair. If the DVD seems to have power, but the DVD drive door does not open, press the button firmly a few times.
How can I tell if my DVD drive is working?
If that doesn’t work, verify the status of the DVD drive. To check the status of the DVD drive, open My Computer, right click the drive and select Properties. The Properties Window will say if the device is working properly. If Windows recognizes a problem with the DVD drive’s hardware or drivers,…
How do I get power DVD to run full screen?
Go to the Video tab and Enable Hardware Acceleration. Tick ‘Run full screen’ and untick ‘Keep aspect ratio.’ Hardware acceleration will reduce the load on your CPU. It will also probably improve the colour by stopping Chroma Upsampling Error, which is a fault in the PowerDVD software decoder.
Why does my DVD player not play PowerDVD?
2. The DVD disc drive on your computer has been broken. Apart from PowerDVD itself, another important factor that may have great influence is the disc drive. If the disc drive is broken, then it will not be able to read the DVD disc information correctly. 3. Incompatibility between the DVD disc and the drive.
Why does my DVD player keep saying check disc?
Some DVD players may display a Check Disc error. NOTE: It is normal for the DVD player to pause briefly when changing layers on a dual-layered DVD disc. This will occur at the same point in the movie every time the disc is played. Make sure that the disc has been inserted properly into the player.
How can I Reset my DVD player to factory settings?
Unplug the power cord of the DVD player from the AC outlet. Let the DVD player remain without power for 1 minute. Plug the power cord back into the AC outlet. Turn on the DVD player. Reset the DVD player to factory default settings. NOTE: For instructions on how to reset your DVD player, refer to the supplied operating instruction of the unit.
How to play a disc in a DVD player?
The DVD player cannot read or play the inserted disc. 1 Turn off the DVD player. 2 Unplug the power cord of the DVD player from the AC outlet. 3 Let the DVD player remain without power for 1 minute. 4 Plug the power cord back into the AC outlet. 5 Turn on the DVD player.