How do you start a lawn mower step by step?

How do you start a lawn mower step by step?

1. Step 1: Position the lawn mower.
2. Step 2: Check the petrol level.
3. Step 3: Check the oil level.
4. Step 4: Check the spark plug.
5. Step 5: Press the fuel button 3 to 5 times.
6. Step 6: Put the throttle in the start position.
7. Step 7: Pull the starter rope.
8. Step 8: Lawn mowing!

How do you start a Murray lawn mower?

Go behind the Murray mower. Grab the throttle lever on the handle with one hand and the handgrip of the recoil rope with your other hand. Press the throttle lever toward the handle and pull the recoil rope with a swift jerk. You may have to pull on the recoil rope three times for the Murray push mower engine to start.

How do you start a Murray push mower?

How do you start a push mower?

Stand behind the lawn mower. Use one hand to hold the engine stop lever in the operating position. Use the other hand to hold the recoil starter handle. Slowly pull the recoil starter handle until resistance is felt, then pull quickly to start the push mower engine.

How do you start a choke on a riding lawn mower?

How to Start a Riding Lawn Mower?

1. Sit firmly on the seat.
2. Start the Engine.
3. Press the Brakes.
4. Engage the Parking Brake.
5. Put the Gear to Neutral.
6. Pull the Throttle onto Choke Position.
7. Insert the Ignition Key.
8. Turn the Key to the Right hand side/Clockwise.

What’s the best way to start a Murray lawn mower?

Sit on the seat and press the clutch/brake pedal all the way forward with your foot. When the engine starts, lower the throttle to the slow position. It is a good idea to tune your Murray lawnmower at the start of the mowing season. It is a good idea to tune your Murray lawnmower at the start of the mowing season.

Where is the model number on a Murray push mower?

Find Your Murray Model Number. Model Numbers on Murray riding lawn mowers are found on the back of the mower or under the seat. Model numbers on Murray push mowers and walk behind mowers are normally on the center of the deck between the brackets that mount the lower handle.

How many horsepower does a Murray lawn mower have?

The 17-horsepower lawn tractor has a 42-inch cutting deck. Riding lawn mowers require a few more steps than just stepping on the brake and turning the key to start the engine that can differ between manufacturers, so it is important to familiarize yourself with the starting requirements for your Murray mower before tackling the lawn.

Where do you fill the gas tank on a Murray lawn mower?

Fill the fuel tank with regular unleaded gasoline. Find the primer button on the side of the engine near the carburetor. Push the primer button three times, allowing about two seconds between each push. Insert the dipstick and cap into the oil fill neck. Go behind the Murray mower.