How do you turn off the brake light on a Chevy Silverado?
The only way to turn the brake light off is to restore proper line pressure to both brake circuits when the pedal is pushed. If your Silverado is having trouble stopping, or noticeably leaking fluid, don’t drive it. Just have it towed to a mechanic.
Why are the front brakes on my Chevy Silverado not working?
I CAN’T SAY FOR SURE THAT THE WAL-MART GUY WAS THE CULPRIT. SOLUTION; FIRST RAN SEVERAL BOLLLES OF BRAKE FLUID THROUGH SYSTEM ( EQUALLY ON ALL 4 WHEELS). THEN REMOVED ALL WHEEL CYLINDERS; CLEANED, HONED, PUT NEW RUBBERS IN THEM. I’, NOT A VERY SMART PERSON BUT MY LONG SHOT THEORY WAS ALL THAT WAS LEFT.
Why does my brake light keep turning on?
It could happen due to a loose connection of the wire or the corrosion or damage of the wire ends. Connect the light switch to a good ground with a jumper wire and press the brake pedal. If the brake light turns on, you have to fix the ground connection.
Why is my Trailer light not working on my Silverado?
If the signals going to your harness are okay, you’ll need to test the signals coming out of the harness, and if they are correct then your issue is likely going to be with the trailer side wiring. An important issue you will want to take a look at are the ground connections, as they can be the cause of numerous lighting problems.
Why are my brakes not working on my Silverado?
I’d love to blame the problem on trailer wiring, but the same trailers function perfectly when connected to Ford trucks and older GM’s. This isn’t an intermittent, works on some trailers not on others thing. Neither truck has ever cosistently operated the brakes on any trailer properly.
How to fix a turn signal relay in a Chevy Silverado?
How to fix a Turn Signal Relay in a Chevy Silverado 1 Start the car so that when testing the lights you won’t run down your battery. Have a friend help you check the lights. 2 Check each of the turn signal light bulbs, especially the bulbs that you found not working. 3 Replace any burned out bulbs and retest the lights.
Why does my trailer say check trailer wiring?
Any trailer I ever connected them to I constantly get the “trailer connected” message followed by “check trailer wiring”. I’d love to blame the problem on trailer wiring, but the same trailers function perfectly when connected to Ford trucks and older GM’s.