How does the turn signal work on a Dyna Glide?
This article applies to the Harley Davidson Dyna Glide. There are many modules on your Harley Davidson that track as well as monitor the state of your powertrain and accessories. The Turn Signal Security Module monitors the signals and the alarm system for the bike. When there is a problem, the red light key will illuminate.
How big are the turn signals on a Harley?
COWONE 3 1/4 Inch Led Turn Signals Front 1157 Turn Signal LED Running Lights for Harley Motorcycle Road Glide Road King Softail Ultra Classic Ultra Limited Electra Glide… . . Only 8 left in stock – order soon.
Why is my turn signal not working on my Harley?
These reasons include a dying key fob battery, blown turn signal bulb, or bad fuse. Fixing these problems could lead to the module clearing its own code. Accessing the diagnostics menu requires you to press several of the accessory switches in a very specific manner, within a short amount of time.
Where does the flasher go on a Harley Davidson?
Check the flasher for functionality (turn signal relay). The wiring for the turn signal lights goes through the turn signal switch. This means that the turn signal switch may be bad.
Where can I buy a Harley Davidson turn signal?
Motorcycle turn signals from Harley-Davidson are anything but basic. Shop our selection of bullet and LED motorcycle turn signals online. Motorcycle Turn Signals | Harley-Davidson USA
Are there replacement parts for the Harley Davidson Electra Glide?
We stock more than eight million parts, accessories, gear, and apparel products to meet all your riding needs. For regular maintenance and repairs, or if you’re just looking to keep your ride in original factory condition, we have Harley-Davidson Electra Glide replacement parts on sale.
Check the flasher for functionality (turn signal relay). The wiring for the turn signal lights goes through the turn signal switch. This means that the turn signal switch may be bad.
Why is my hazard light not working on my Harley?
Check the hazard light box and make sure all signal wires are attached. Check the flasher for functionality (turn signal relay). The wiring for the turn signal lights goes through the turn signal switch. This means that the turn signal switch may be bad. If only one light (or one side) isn’t working, check the power to the bulb plug-in connections.
Why does my turn signal on my Dyna not flash?
I have a ’94 dyna wide glide and whenever I use the turn signals they do not flash, if I hit the right signal it just lights up soild and does not flash and that goes for the left side as well. I went to the dealer and asked what would cause this problem my first guess was a relay but the dealer said it was most likely the turn signal module.
Check the hazard light box and make sure all signal wires are attached. Check the flasher for functionality (turn signal relay). The wiring for the turn signal lights goes through the turn signal switch. This means that the turn signal switch may be bad. If only one light (or one side) isn’t working, check the power to the bulb plug-in connections.
Can a broken turn signal on a Harley Davidson be fixed?
This article applies to the Harley Davidson Touring. A busted or erratic turn signal repair can be a drag to fix, especially on the road. It’s not a showstopper because you can still ride. But turn signals are an essential part of bike safety. Hand signals are fine during the day, yet are hard to see at night.
This article applies to the Harley Davidson Dyna Glide. There are many modules on your Harley Davidson that track as well as monitor the state of your powertrain and accessories. The Turn Signal Security Module monitors the signals and the alarm system for the bike. When there is a problem, the red light key will illuminate.
I have a ’94 dyna wide glide and whenever I use the turn signals they do not flash, if I hit the right signal it just lights up soild and does not flash and that goes for the left side as well. I went to the dealer and asked what would cause this problem my first guess was a relay but the dealer said it was most likely the turn signal module.
Why are the turn signals on my Harley Davidson not working?
I’m not getting any power to the right side turn signals, the green arrow on the dash don’t light up on right, and turn signals are very dim and slow on left side. Wiring seems to check out, fuses ok.
When did the Harley Davidson Dyna Wide Glide come out?
1993: The Dyna Low Rider and Dyna Wide Glide are introduced, the two among the most popular Dyna models throughout the frame’s 26 year production run. 1995: Until this year, all Dynas had a 32-degree front rake, but in 1995 a more responsive 28-degree rake was introduced to the sportier Dyna models.
What’s the red warning Lite above the odometer on a Dyna Wide Glide?
2001 dyna wide glide need to know what the red warning lite above the odometer on the left is all about. just bought the bike and service/owners manuals are on back order. HELLLLPPP! please. im losing some ofr the best puttin weather in months!
Is there a problem with LED tail lights?
Hyper-flashing is a potential issue with all LED tail lights and can be the result of many factors beyond our control. However, in spite of implementing preventive measures to address this condition proactively, it is not possible to account for every cause of hyper-flashing. Therefore, hyper-flashing is not a warrant-able condition.
What causes a fuse to blow on a tail light?
The connector that goes into the rear fender. Using a powered test light or multimeter test each pin in the fender harness connector to ground. The grounded wire/wires will be the cause for the blown fuse. Wasn’t able to look at it tonight.
Where are the lights on a Harley Davidson?
Look at the wires under the back fender to start with. Also sometimes the bulb socket will short out , check that too . Unplug the connector for the rear lights under the seat. The connector that goes into the rear fender.
What to do when your tail lights blow out?
Look at the wires under the back fender to start with. Also sometimes the bulb socket will short out , check that too . Unplug the connector for the rear lights under the seat. The connector that goes into the rear fender. Using a powered test light or multimeter test each pin in the fender harness connector to ground.
Why are the windings on my motorcycle short to ground?
If the copper inside the insulation rubs against the flywheel as an example, you could have the windings short to ground. This is a problem because it all loops back to the regulator through your battery negative connection. The motor, the frame, and everything metal on the motorcycle are tied to battery negative.
How to turn off ignition key on TSM?
7 Quickly (within 2 seconds) turn Ignition key OFF-ON Security Lamp remains lit for V-Rod and TC88 with TSSM. Lamp will not be on for TC88 TSM models. – 8 Wait until Security Lamp turns off or a minimum of 10 minutes has passed.
What is the TSSM code for a Harley Davidson?
If the siren responds with 3 chirps instead of 2 the siren battery is bad. Pin A (Bn/Gy) is positive voltage downstream of the 15amp security fuse. 34= Starter relay and coil are grounded via TSSM when disarmed and ignition on. Starter relay could be bad (voltage present on pin 9) (Tn/Gn) when not starting engine.
What is the trouble code for a TSSM siren?
25= should be no voltage present on pin 10 with key off. (Lt Grn/Gy wire on TSSM) 31&32= Middle pin on siren goes low voltage to fire alarm, high voltage to stop. If the siren responds with 3 chirps instead of 2 the siren battery is bad. Pin A (Bn/Gy) is positive voltage downstream of the 15amp security fuse.
7 Quickly (within 2 seconds) turn Ignition key OFF-ON Security Lamp remains lit for V-Rod and TC88 with TSSM. Lamp will not be on for TC88 TSM models. – 8 Wait until Security Lamp turns off or a minimum of 10 minutes has passed.
If the siren responds with 3 chirps instead of 2 the siren battery is bad. Pin A (Bn/Gy) is positive voltage downstream of the 15amp security fuse. 34= Starter relay and coil are grounded via TSSM when disarmed and ignition on. Starter relay could be bad (voltage present on pin 9) (Tn/Gn) when not starting engine.
25= should be no voltage present on pin 10 with key off. (Lt Grn/Gy wire on TSSM) 31&32= Middle pin on siren goes low voltage to fire alarm, high voltage to stop. If the siren responds with 3 chirps instead of 2 the siren battery is bad. Pin A (Bn/Gy) is positive voltage downstream of the 15amp security fuse.
What makes a 2009 Dyna Super Glide special?
The 2009 Dyna Super Glide Custom is derived from the simple model so apart from the Fat Bob gas tank with chrome tank console and console-mounted speedometer, two-up ribbed seat, pullback handlebars and chrome laced steel wheels with standard spokes there isn’t much to help set it apart from the standard model.
Why does my Dyna Glide not start up?
Surprisingly, a faulty fuel gauge has caught numerous owners off-guard, and upon refilling the tank, the bike has started right up. If your bike is a carbureted model and you are not getting any fuel, chances are the carb is gummed up and the jets are not flowing any fuel. A quick disassembly and cleaning is often an easy fix. Figure 7.
Which is the best Harley Davidson Super Glide?
Click photos to enlarge. They make great desktop images. For riders who want a head start on building their dream custom motorcycle or for those who just want a little more straight from the showroom floor, the Dyna® Super Glide® Custom model may be the perfect bike.
Is the 2011 Harley-Davidson Dyna Super Glide Custom?
2011 Harley-Davidson FXDC Dyna Super Glide Custom. Picture credits – Harley-Davidson. Submit more pictures. More pictures… For riders who want a head start on building their dream custom motorcycle or for those who just want a little more straight from the showroom floor, the Dyna® Super Glide® Custom model may be the perfect bike.
What kind of seat does a Dyna Super Glide have?
For riders who want a head start on building their dream custom motorcycle or for those who just want a little more straight from the showroom floor, the Dyna® Super Glide® Custom model may be the perfect bike. This stylish performer’s long, low profile is enhanced by a low-slung, two-up ribbed seat.
Why is my Harley Davidson Dyna Glide not starting?
If your battery voltage and connections are in good condition, but your engine is still refusing to turn over, the problem may be in the starter circuit. Perhaps the easiest place to begin is at the starter solenoid on the right side of the motorcycle.
Where are the fuses on a Harley Davidson Dyna Glide?
This article applies to the Harley Davidson Dyna Glide (2000-2015). All of the electrical components on you motorcycle are routed together through the fuse box, which contains the fuses as well as relay.
Why do my turn signals flash when I Turn Off the ignition?
I don’t have any blown fuses, and the turn signals still flash when I turn the ignition off indicating that the security system is activated. Any ideas of what this could be would be greatly appreciated. Check the accessory fuse again. Maybe with a test light.