How to install a generator on a Toyota Celica?
Connect the generator wire, and install the nut and rubber cap. Connect the generator wire, and install the rubber cap and nut.
Where is the fuse box on a Toyota Celica?
Always use a genuine Toyota fuse or equivalent. Do not modify the fuses or fuse boxes. If the replaced fuse blows again, have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. The fuse panel is located behind the cover on the passenger’s side of the central console.
What are the stop lights on a Toyota Celica?
Stop lights, high mounted stoplight, multiport fuel injection system/ sequential multiport fuel injection system, cruise control system cancel device, electronically controlled automatic transmission system, anti-lock brake system
What is wiring diagram for electric fuel pump?
First some good practices, one is proper wiring, fusing and using the right safety circuits to keep you and your car safe. This project will show 2 basic wiring diagrams for electric fuel pumps. One without a warning light one with. Some parts are optional like the inertia switch, but highly recommended.
How much torque does a Toyota Celica have?
SIZED FOR PRINT REMOVE PULLEY a. b. ZOOM Hold SST (A) with a torque wrench, and tighten SST (B) clockwise to the specified torque. SST 09820-63010 Torque: 39 Nm (400 kg.cm, 29 ft.lb) Check that SST (A) is secured to the rotor shaft. SIZED FOR PRINT fPage 3 of 9 c. d. ZOOM Mount SST (C) in a vise.
How to wire a Toyota Celica rear end?
SIZED FOR PRINT INSTALL REAR END COVER a Install the end cover and plate terminal with the bolt and 3 nuts. Torque: Nut 4.4 Nm (45 kg.cm, 39 in.lb) Bolt 3.9 Nm (39 kg.cm, 35 in.lb) b. Install the terminal insulator with the nut. Torque: 4.1 Nm (42 kg.cm, 36 in.lb) 7. CHECK THAT ROTOR ROTATES SMOOTHLY fPage 1 of 2 REMOVAL ZOOM 1.