Is there a problem with my left turn signal?
So I was having the left turn signal issue that was intermittent and would activate the “hazard” lights (all 4 signals flashing; 6 if you count the side mirrors). So I researched here, and found what I thought to be a pretty solid fix for the issue.
What causes a GMC Sierra to lose its Stabilitrak system?
There are many things that can cause the StabiliTrak system to lose its ability to function. It is a complex system. Wheel Speed Sensor – If one of the wheel speed sensors is out, your Sierra will no longer be able to tell if all of the wheels are turning at the same speed.
What are the different colors of GMC warning lights?
They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray). There are 50 of them, so search carefully! Models examined include Acadia, Savana, Sierra, Terrain, and Yukon.
Where is the fuse box on a GMC Sierra?
GMC Sierra (2009 – 2013) – fuse box diagram Posted on 28 December 201624 October 2018by admin GMC Sierra (2009 – 2013) – fuse box diagram Year of production: 2009, 2010, 2011, 2012, 2013 Instrument Panel Fuse Block The instrument panel fuse block access door is located on the driver’s side edge of the instrument panel.
Why is my turn signal not working on my GM Truck?
“No power coming out of BCM for turn signal-tested-found circuit 1334 yellow & black wire shorted to ground-found short located in underhood fuse block-replaced underhood fuse block.” My cost for repair: $600. However, a few weeks later, the left rear turn signal stopped working again. I took it back to the dealer.
So I was having the left turn signal issue that was intermittent and would activate the “hazard” lights (all 4 signals flashing; 6 if you count the side mirrors). So I researched here, and found what I thought to be a pretty solid fix for the issue.
There are many things that can cause the StabiliTrak system to lose its ability to function. It is a complex system. Wheel Speed Sensor – If one of the wheel speed sensors is out, your Sierra will no longer be able to tell if all of the wheels are turning at the same speed.
Where is the owner manual for a 2012 GMC Sierra?
GMC Sierra Owner Manual – 2012 – CRC – 11/15/11 Black plate (4,1) iv Introduction Using this Manual To quickly locate information about the vehicle, use the Index in the back of the manual. It is an alphabetical list of what is in the manual and the page number where it can be found. Danger, Warnings, and Cautions
Why did my Silverado Sierra Flasher go bad?
My flasher relay went bad as well..the dealer fixed it i dont know what part number they used but if u can use the 3/6 with no issues just use it that way your good to go when u upgrade Well, stupid me, I guess I totally missed the blown fuse… So replaced that and we are signaling again!
What’s the part number on my Silverado Sierra?
Well, i purchased the new part number recommended in the video (10383321) AC Delco part. Replaced it this morning and what do you know it solved my issue. For about 5 hours.
What are the symptoms of a bad turn signal Flasher?
1. Turn signals or hazards do not function. The most common symptom of a bad or failing turn signal / hazard flasher is hazards or turn signal lights that do not function. If the flasher breaks or has any internal issues it can cause the lights to malfunction, or not respond at all when the turn signal lever or hazard light button are pressed.
Why do the tail lights work but not the turn signal?
The tail lights work but not the turn signal. The left front flashes rapidly and the right side signals work so I figure it’s not the flasher unit. is there something else I should be considering? *#&! electrical problems! Could be a broken wire going to the brake light switch . Since the brake
Is there a problem with the turn signal hazard relay?
While issues with the turn signal hazard relay will not normally affect the driveability of the vehicle, they can cause problems that can compromise vehicle visibility and safety. While flasher relays are not complicated components, they can sometimes be difficult to diagnose due to the highly complicated nature of electrical systems.