Is there steering wheel sensor on GMC Yukon?
I’m currently in progress of a complete rebuild of my front suspension and having a difficult locating a suitable steering wheel position sensor for the one I broke a few months ago. It seems that the sensor in NNBS vehicles from 2007-2009 are different from the rest of silverados…etc.
What kind of engine does GMC Yukon have?
Cargo and load capacity limited by weight and distribution. Yukon’s 8,400-lb rating requires 2wd with 6.2L EcoTec3 V8 engine. Before you buy a vehicle or use it for trailering, carefully review the trailering section of the Owner’s Manual. The weight of passengers, cargo and options or accessories may reduce the amount you can tow.
When did the GMC Yukon XL come out?
The eleventh generation Chevrolet Suburban, GMC Yukon XL, and Yukon Denali XL were introduced to the public on September 12, 2013, and GM unveiled the vehicles in different locations (The Suburban in New York, Yukon XL in Los Angeles) on that date.
How many seats does a GMC Yukon have?
Seating for 9 requires SLE with front bench seat. Starting at price for 2020 Yukon SLE. The Manufacturer’s Suggested Retail Price excludes destination freight charge, tax, title, license, dealer fees and optional equipment. See your GMC dealer for details. Click here to see all GMC destination freight charges.
How does a steering angle sensor work on a car?
Digital sensors rely on a tiny LED light that transmits information about the angle the wheel is currently in and sends the information to the vehicle’s computer. The steering angle sensor finds a disparity between the course your vehicle is traveling and the position the steering wheel is held at.
Why is my steering wheel postion sensor not working?
It’s very common for many mechanic shops to forget to reset or realign the steering angle sensor after they’ve completed their service. This can cause the symptoms above to occur, such as lighting the Traction Control Light, Check Engine Light, or impacting the drivability of the vehicle.
What’s the part number for the steering wheel sensor?
It seems that the sensor in NNBS vehicles from 2007-2009 are different from the rest of silverados…etc. The part number I’ve found is GM OEM 15886733 but I’m having a hell of a time finding the part.
I’m currently in progress of a complete rebuild of my front suspension and having a difficult locating a suitable steering wheel position sensor for the one I broke a few months ago. It seems that the sensor in NNBS vehicles from 2007-2009 are different from the rest of silverados…etc.
Can a GM steering wheel sensor be replaced?
Easy replacement for most, saves money over dealer doing same replacement. You will need a scanner capable of reading ABS/Traction codes in order to clear the code from the system. Common failure on these GM vehicles which will cause a code and intermittent warning light on dash for the traction control system.
How to reset the steering angle sensor at home?
1 Turn the steering wheel first as far as it will go anticlockwise and then as far as it will go clockwise 2 Turn off the engine and remove the key from the ignition 3 Remove driver side wheel, stop and pack vehicle 4 Turn off ignition, remove key, wait 10 seconds 5 Start engine, confirm normal Active Steering operation
Where is the steering wheel position sensor located?
When I turn it off and back on, the warnings are gone again for another 10 minutes or so. And it is throwing code C0710, steering wheel position sensor. I took a look at the one under my dash that is failing and it has a 6 pin electrical connector.