What are the brake lights on a Dodge Stratus?
Your brake lights are the only indication that other drivers have when you are slowing or stopping. Without functional brake lights, you risk a rear-end collision if the driver behind you is not aware that you are stopping. The Dodge Stratus uses a 3157 stop light bulb available at most auto parts stores.
How do you change the light bulb on a Stratus?
Change the bulb at home to save yourself the expense of a service specialist. Open the trunk of your Stratus and pull the trunk liner away from the taillight assembly. Pull the electrical connection off the connector on the bulb. Pull the three clips free that secure the light assembly.
How do you change a tail light bulb?
Pull the bulb straight out of the socket and discard it. Push the new bulb into the socket. Insert the bulb into the taillight assembly and turn it clockwise until it is secure. Push the wiring harness connection into place until it clicks. Replace the taillight assembly in the mounting area. Push the three retaining clips into place.
Your brake lights are the only indication that other drivers have when you are slowing or stopping. Without functional brake lights, you risk a rear-end collision if the driver behind you is not aware that you are stopping. The Dodge Stratus uses a 3157 stop light bulb available at most auto parts stores.
How do you get a taillight out of a Stratus?
Open the trunk of your Stratus and pull the trunk liner away from the taillight assembly. Pull the electrical connection off the connector on the bulb. Pull the three clips free that secure the light assembly. There are two on the outside edge of the light assembly and one on the inside edge. Pull the light assembly out of the mounting area.
Pull the bulb straight out of the socket and discard it. Push the new bulb into the socket. Insert the bulb into the taillight assembly and turn it clockwise until it is secure. Push the wiring harness connection into place until it clicks. Replace the taillight assembly in the mounting area. Push the three retaining clips into place.
Open the trunk of your Stratus and pull the trunk liner away from the taillight assembly. Pull the electrical connection off the connector on the bulb. Pull the three clips free that secure the light assembly. There are two on the outside edge of the light assembly and one on the inside edge. Pull the light assembly out of the mounting area.
How do you remove a bulb from a taillight?
Grasp the bulb and turn it counter-clockwise to remove it from the light assembly. Pull the bulb straight out of the socket and discard it. Push the new bulb into the socket. Insert the bulb into the taillight assembly and turn it clockwise until it is secure. Push the wiring harness connection into place until it clicks.
Grasp the bulb and turn it counter-clockwise to remove it from the light assembly. Pull the bulb straight out of the socket and discard it. Push the new bulb into the socket. Insert the bulb into the taillight assembly and turn it clockwise until it is secure. Push the wiring harness connection into place until it clicks.
Why is my 3rd brake light bulb not working?
If playback doesn’t begin shortly, try restarting your device. An error occurred. Please try again later. (Playback ID: -SiHBI5ZnNNlmzz8) Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information.
Where is the brake light switch on a Dodge Ram?
Dodge Ram turn signal lever. The brake light switch can wear out, which translates into no brake lights on your Dodge Ram. If the bulbs as well as the connections are good and the wires are properly grounded, replace the switch. You will find it under the brake pedal. Figure 4. Brake light switch.
What to do if your brake lights don’t work?
Locate the bulbs in the lights that do not work and try these fixes: Remove the bulbs one by one. Check for a burned out bulb and replace if necessary. Check for corrosion on the base of the bulb. If you find corrosion, clean each bulb’s contacts with a file. Re-insert the bulb, making sure it is seated securely. They can crack and become frayed.
How to change the turn signal on a Dodge Ram?
Refer to the inside sticker of the fuse box panel and locate the two flasher relays. Switch the relays, and check if the turn signal lights are flashing. If one or both of the relays fails to turn on the turn signal light, replace as needed.
How to replace the bulb in a third brake light?
How to Replace the Bulb in a Third Brake Light Step 1. Locate your car’s third brake light housing, which may be accessed from the rear package shelf below the rear… Step 2. Remove the holding screws from the brake-light housing with a Philips screwdriver in a counterclockwise… Step 3. Pull the …
How do you remove a light bulb from a light fixture?
Pull the electrical connection off the connector on the bulb. Pull the three clips free that secure the light assembly. There are two on the outside edge of the light assembly and one on the inside edge. Pull the light assembly out of the mounting area. Grasp the bulb and turn it counter-clockwise to remove it from the light assembly.
Change the bulb at home to save yourself the expense of a service specialist. Open the trunk of your Stratus and pull the trunk liner away from the taillight assembly. Pull the electrical connection off the connector on the bulb. Pull the three clips free that secure the light assembly.
Pull the electrical connection off the connector on the bulb. Pull the three clips free that secure the light assembly. There are two on the outside edge of the light assembly and one on the inside edge. Pull the light assembly out of the mounting area. Grasp the bulb and turn it counter-clockwise to remove it from the light assembly.