What car came with a B18C engine?
The Honda B18 engine is built as a pure DOHC engine for the most part as a VTEC engine in compact cars from Honda . It is found in the Civic , CRX, CRX Del Sol , Integra , CR-V and some other models.
What is a JDM Type R motor?
The Integra Type R is equipped with a 1.8-liter DOHC VTEC in-line 4-cylinder (B18C) engine. In the JDM Type R this engine produces 200 PS (197 hp; 147 kW) at 8,000 rpm, whereas in the US models it produces 195 hp (198 PS; 145 kW) at 8,000 rpm and 130 lb⋅ft (176 N⋅m) of torque at 5,700 rpm.
What is a B18C5 engine?
The B18C5 uses lightweight valves with thinner stems than those found in the standard Integra GS-R, which help the engine spin to its 8400-rpm redline. The VTEC variable valve timing system increased lift by nearly a full millimeter on the intake side, and 1.1mm on the exhaust end past 5700 rpm.
What car has a B16A engine?
B16A (Second Generation) 1992–1993 Honda Integra “XSi” (DA6, DA8) 1992–1994 Honda Civic SiR/SiRII (EG6) 1992–1993 Honda Civic Ferio SiR (EG9) 1992–1995 Honda CR-X del Sol SiR (EG2)
What kind of engine does a Honda Integra B18C have?
For the B18C 98 Spec R engine, the 4-1 header was used. The power was 200 HP @ 8,000 rpm; and the torque was 186 Nm @ 7,200 rpm. This engine can be found in Honda Integra Type R. The B18C Type R engine can be identified by the red valve cover, the 4-1 header, and an intake collector. 8. B18C1 was an engine for USDM Acura Integra GSR.
What are the dimensions of a Honda B18C engine?
The intake valve diameter was 31 mm, exhaust valves diameter was 28 mm, valve stem diameter was 6.6 mm. In 1994, B18C engine appeared with the cylinder block deck height of 212.4 mm and oil jets, a new crankshaft with the stroke of 87.2 mm, lightweight 137.9 mm rods, modified pistons,…
What kind of engine does a Honda B16 have?
The Honda B16 has appeared in six different forms over the years. The Honda B-series was replaced by the K-series in Civic, Integra, and CR-V applications.
What kind of transmission does a Honda B18A have?
Rod/Stroke Ratio: 1.54 Transmission: S1, A1, cable. The Japanese B18A is not considered part of the modern B-series family. This engine shares many characteristics with the B20A/B21 Rod/Stroke Ratio: 1.54 Transmission: YS1, cable. Larger input shaft than 90-91.
What kind of engine does a Honda B18C5 have?
12. B18C5 was an analog of the JDM B18C Type R for USDM Acura Integra Type R. In this engine, they used new pistons with the compression ratio of 10.6 and deeper valve reliefs, and lighter connecting rods, the most aggressive camshafts; VTEC was triggered at 5,700 rpm.
Is the Honda B engine the same as the B16A?
B16B (Type R) Note: This engine uses the same block as the Integra Type R, which is taller than the B16a block, but with a crank the same stroke as the b16a. It uses longer rods to accommodate for this, which is why the Rod/Stroke ratio is higher than a standard B16.
How much power does a Honda Integra b18c2 have?
This was an analog to JDM B18C, but the compression ratio was reduced to 10. The VTEC system was triggered @ 4,400 rpm, intake manifold was triggered @ 5,800 rpm. The power was 170 HP @ 7,600 rpm; torque was 174 Nm @ 6,200 rpm. 9. B18C2 was an analogue of B18C1 for Australia and New Zealand. The engine was designed for Honda Integra VTi-R. 10.
Rod/Stroke Ratio: 1.54 Transmission: S1, A1, cable. The Japanese B18A is not considered part of the modern B-series family. This engine shares many characteristics with the B20A/B21 Rod/Stroke Ratio: 1.54 Transmission: YS1, cable. Larger input shaft than 90-91.