What causes a shift problem on a Dodge Ram truck?

What causes a shift problem on a Dodge Ram truck?

The trick is that only 3/4 and 1 Ton Trucks are usually equipped with such a sensor. For Dodge RAM Trucks that are not equipped with a Transmission Temperature Sensor and are experiencing problems with the shift parameters of the Automatic Transmission, the problem usually is caused by a defective Transmission Pressure Solenoid.

How to fix a 1996 Dodge Ram transmission problem?

An expert whose answer got voted for 2 times. Have a 96 dodge ex cab long wheel base automatic shifts fine in 1st 2nd but in drive it wont **** out of second to any other gear and wont go into reverse either..dont know what to try first.. any help.. You can’t post conmments that contain an email address.

What’s the transmission filter on a Dodge 1500?

Please try again later. 01 Dodge Ram 1500 transmission filter and governor solenoid needed to be changed, along with some fresh transmission fluid and gasket. This is a quick vlog to show what steps I took when I pulled the pan off the automatic transmission on my 2001 Dodge Ram 1500 with a 5 inch lift kit and 35 inch tires.

What kind of transmission does a Dodge 1500 have?

The Truck used during this video is a 1995 Dodge RAM 1500 2wd Equipped with a 46RH Automatic Transmission and 5.9 L Engine also known as 360. ( 360 ci displacement) These steps also apply to Dodge RAM Trucks Equipped with a 42RH Automatic Transmission, and R and R steps for 47RH Automatic Transmission in case the Pressure Solenoid is defective.

What are the most common Dodge Ram transmission problems?

If so, you are experiencing some of the most common Dodge Ram transmission problems. We know how annoying it is to deal with transmission problems. Sometimes you’re going down the road and of all a sudden, the truck loses power. But forget about that!

Is there a problem with my Dodge truck?

Dodge Truck 1-2 Shift Problem. Dodge Pickup trucks with the 46/47/48 series transmissions are known to have a problem with losing 2nd gear or a soft shift in 2nd gear after 70,xxx to 100,xxx miles. Some describe it has shifting weird & that they don’t know exactly what’s wrong but they know it’s not right.

What’s the problem with the Dodge Ram 1500?

Dodge RAM 1500 Transmission Shifting Problem Caused by Defective Pressure/Overdrive Solenoid. – YouTube Dodge RAM 1500 Transmission Shifting Problem Caused by Defective Pressure/Overdrive Solenoid.

What causes a Dodge Ram to go into overdrive?

If fluid temperature exceeds 126°C (260°F), the PCM causes a 4-3 downshift and engage the converter clutch. Engagement is according to the third gear converter clutch engagement schedule. The overdrive OFF lamp in the instrument panel illuminates when the shift back to third occurs.

Are there transmission problems with the Dodge Ram?

The 2007 model year of the Dodge Ram was also known for having some transmission problems. In particular these resided with shifting difficulties like we’ve seen in other models, as well as total transmission failure requiring replacements. As with others, this problem for some drivers ended up with more than one replacement of a transmission.

Why does my truck not shift into overdrive?

Truck makes absolutely no effort to shift into over drive. Shifting is NOT erratic. Cruise control and speedometer STILL work. Is this a bad overdrive solenoid, tps sensor or something else!?!! :doh: :confused013: I also get “CODE 36”.

How does the transmission work in a Dodge Ram?

The transmission is comprised of several planetary gear sets with friction bands and bearings. Fluid is pumped into the transmission by a hydraulic pump. Once pressurized, it can be used to actuate servos that compress and apply bands for gear selection.

How to troubleshoot automatic transmission troubleshooting ( 47rh )?

1. Low fluid level.1. Correct fluid level and check for leaks. 2. Throttle cable or linkage out of adjustment. 2. Adjust linkage or cable as described in service section. 3. Throttle cable or linkage is binding. 3. Disassemble, clean, and adjust linkage; replace linkage grommets if worn or cracked. Replace cable if seized.