What does a jet kit do?
A jet kit is a comprehensive assortment of jets that allows you to reconfigure your carburetor’s fuel delivery either to suit some specific purpose such as the installation of an aftermarket exhaust or airbox kit, or to correct some deficiency in the way the bike runs from the factory.
Do you need a pilot jet for a K & N Filter?
If you go more than 5 or 6 FULL turns out, you will probably have to install LARGER pilot jets. Larger pilot jets are usually needed if you have removed the stock air intakes, air box and installed K & N filters which dramatically INCREASE air intake volume.
Do you need to replace needle on K & N Filter?
There’s usually no need to replace the stock needles since they have proven over time to provide good performance and good gas mileage. If you do use a third party needle for increased performance, then anticipate lower fuel efficiency. Mid-range tuning is accomplished mainly by how the bike performance feels to you.
Why does my check engine light come on after installing a k & n air filter?
While uncommon, it is possible that a check engine light may come on after installing a K&N® air filter or performance intake system-but this does not necessarily mean that there is something wrong with your air filter or intake system.
Can a jet kit increase the horsepower of a jet?
Jetsrus jets DO NOT use adapters which interfere with precise fuel flow. Some jet kits promise big power gains of 5% to 25% and better fuel economy on STOCK engines, can every jet kit do that? No, Jets cannot by their self increase horsepower 5% to 25% on stock engines. Jets alter the amount of fuel into the carb.
If you go more than 5 or 6 FULL turns out, you will probably have to install LARGER pilot jets. Larger pilot jets are usually needed if you have removed the stock air intakes, air box and installed K & N filters which dramatically INCREASE air intake volume.
There’s usually no need to replace the stock needles since they have proven over time to provide good performance and good gas mileage. If you do use a third party needle for increased performance, then anticipate lower fuel efficiency. Mid-range tuning is accomplished mainly by how the bike performance feels to you.
While uncommon, it is possible that a check engine light may come on after installing a K&N® air filter or performance intake system-but this does not necessarily mean that there is something wrong with your air filter or intake system.
How to troubleshoot a faulty jet pump motor?
1 Inspect the pump for a jammed impeller or other damage. 2 Ensure that the wire that runs from the breaker or fuse box to the pump is of a heavy enough gauge. 3 Make sure the power wires are not touching or grounded where they connect into the motor. 4 Restrict the pump’s output to keep the pump within its designed performance range.