What does a Mesa Boogie cab clone do?
The CABCLONE™ is a passive Cabinet Simulator/Speaker+Mic alternative with a built-in Amp Load. It provides a direct interface of your guitar amp’s Speaker Output to the input of a mixing console, microphone preamp or even direct to your converters (recorder) with or without the need for a speaker cabinet.
Is the Mesa cab clone an attenuator?
Since the CabClone is NOT AN ATTENUATOR (allowing you to turn your amp up louder and get less volume), if you are using the CabClone’s internal load (recording silently or headphone use) and you set the amp’s Master’s or Output above where you would NORMALLY set it for live applications, this is where problems can …
How does Suhr reactive load work?
The Reactive Load takes the place of your speaker cabinet in your signal chain. It provides an 8Ω load for your tube amplifier (maximum 100 watts), and produces a balanced and unbalanced signal that interfaces with recording devices, effects, and power amplifiers.
Is Suhr reactive load an attenuator?
Suhr Reactive Load is a guitar amplifier ATTENUATOR to the highest order at musictoyz.com.
What does a reactive load do?
A reactive/inductive load converts current into a magnetic field. It resists the change to voltage, causing the circuit current to lead voltage. Examples of devices producing reactive/inductive loads include motors, transformers and chokes. Reactive/capacitive load charges and releases energy.
What is the difference between resistive load and reactive load?
Resistive Load Banks: The most common type, resistive load banks mimic the operational load that a power source will see in actual use. A reactive/inductive load converts current into a magnetic field. It resists the change to voltage, causing the circuit current to lead voltage.
What is difference between resistive load and reactive load?
Do generators produce reactive power?
Power plant generators produce real power and reactive power. They can be adjusted to change the output of both. Capacitors and Static VAR Compensators, which are generally installed in substations, also are capable of injecting reactive power to help maintain voltage.
Is a capacitor a reactive load?
Reactive/Capacitive Load – A capacitive load charges and releases energy. Capacitive reactance resists the change to voltage, causing the circuit current to lead voltage. A capacitive load bank is similar to an inductive load bank in rating and purpose.
What does purely resistive mean?
A circuit that contains only a pure resistance (ohms) in an AC circuit is called a Purely Resistive AC Circuit. From a technical standpoint, this circuit does not contain capacitance or inductance. In these circuits, the resistors dissipate the power, while the phase of the current and voltage remain the same.
What are examples of resistive loads?
Resistive Load Two common examples of resistive loads are incandescent lamps and electric heaters. Resistive loads consume electrical power in such a manner that the current wave remains in phase with the voltage wave. That means, power factor for a resistive load is unity.
Where does reactive power come from?
Reactive Power describes the background energy movement in an Alternating Current (AC) system arising from the production of electric and magnetic fields.
Is the Mesa / Boogie CabClone a load box?
These cases are hand-tested and guaranteed to fit your guitar. See how we do it The Mesa/Boogie Cabclone is a speaker cabinet simulator and load box that gives you entirely new ways to use your guitar amplifier on stage or in your studio.
Can a mesa CabClone be used as a speaker cabinet?
Sure, your 150-watt tube amp sounds awesome when it’s cranked up, but that’s more volume than most small stages and clubs can take. Plug it into the Mesa/Boogie Cabclone, and you can run the XLR DI output direct to the mixing board instead of trying to mic up a roaring speaker cabinet.
How many Watts Does a Mesa Boogie amp?
I ordered the Boogie Cabclone Speaker Cabinet Simulator to use my Mesa Boogie and Marshall amps at home. While the Boogie amps are 60 watts, the Marshall is 100 watts. You cannot use a 100 watt Marshall at home without leveling the entire neighborhood!
Is the Mesa / Boogie CabClone speaker simulator tilt back?
In typical Mesa/Boogie fashion, the Cabclone speaker simulator is built tough as nails to survive your most demanding gigs. There’s a handy, removeable tilt-back stand built right in so you can place it over the handle on your amplifier head.