What does Auto Hold mean on a Hyundai Genesis?
What is it: The Auto Hold feature keeps your vehicle at a complete stop without you having to keep your foot on the brake pedal.
Can I drive with Auto hold on?
Auto hold has to be re-enabled every time you drive. This is so you don’t get used to a feature that most cars don’t have yet. You can turn on auto hold by pressing the auto hold button while you are driving.
Which cars have Hill start assist?
Later, the technology became available on a variety of modern automobiles, starting with the 2005-onwards Volkswagen Passat, 2011-onwards Volkswagen Jetta, and 2004-onwards Volkswagen Phaeton and Touareg. It is further available on the Subaru Forester, Subaru Impreza and Subaru Legacy.
What does the warning light on the Genesis dashboard mean?
This warning light illuminates when the AEB system is turned off or when the radar sensor or cover is blocked with dirt or snow. Check the sensor and cover and clean them by using a soft cloth. When there is a malfunction with AEB, have your vehicle inspected by an authorized retailer of Genesis branded products.
Why is the ESC light flashing when I start the car?
Under normal operation, the ESC light should only be on when you start the car for a couple of seconds and then turn it off. If the ESC light is flashing when driving that typically, that means that the system is engaged, and it is trying to keep the vehicle under control. It doesn’t mean that there is something wrong with the ESC system.
Can a defective brake light switch cause ESC?
Brake light switch – A defective brake light switch can trigger the ESC light. This is a common problem. Easy to replace and inexpensive. ABS wheel speed sensor – Clean or replace the ABS sensor. ABS, ESP, ESC, DSC module malfunction – Needs to be properly diagnosed.
What does the Genesis EPB malfunction indicator mean?
Take your vehicle to an authorized Genesis service location and have the system checked. The EPB malfunction indicator may illuminate when the ESC indicator comes on to indicate that the ESC is not working properly, but if this occurs, it does not indicate malfunction of the EPB.
Why is the warning light not working on my genesis?
If the warning light does not come on, when you turned the engine start/stop button to the ON position, the Adaptive Front Light System is not working properly. If it blinks while driving, the Adaptive Front Light System is not working properly. Take your vehicle to an authorized Genesis service location and have the system checked.
Take your vehicle to an authorized Genesis service location and have the system checked. The EPB malfunction indicator may illuminate when the ESC indicator comes on to indicate that the ESC is not working properly, but if this occurs, it does not indicate malfunction of the EPB.
When does the Genesis dashboard indicator turn off?
However, when the smart key is not in the vehicle, if the engine start/stop button is depressed, the indicator will blink for a few minutes to indicate that you will not be able to start the engine. When the ignition switch is turned to the ON position and the indicator turns off after two seconds, the system may have a problem.
What does it mean when the ESC indicator blinks?
When a slippery or low traction condition is encountered, the ESC will operate, and the ESC indicator will blink to indicate the ESC is operating. The ESC indicator stays on when the ESC may have a malfunction. Take your car to an authorized Genesis service location and have the system checked.