What is a Hyvo chain?

What is a Hyvo chain?

Application Series. HY-VO® Chain is a unique type of Silent Chain. HY-VO stands for High Capacity, High Velocity, and Involute Tooth, and it is a registered trademark of Borg-Warner Automotive, Inc. In Silent Chain, the pin and the plate rotate against each other.

What is a Morse chain used for?

Another type of drive chain is the Morse chain, invented by the Morse Chain Company of Ithaca, New York, United States. This has inverted teeth. Sometimes the power is output by simply rotating the chain, which can be used to lift or drag objects.

What is HYVO?

hyvo gears are made by borg warner and are just a higher quality set of gears all steel. the cat gears a an inferior product and have had many failures. in most cases you keep rev. you get a new chain and 2 gears as they are made to match.

What is a Morse rocker joint chain drive?

For High Velocity, High Horsepower and High Efficiency Drives with smooth transmission of load in a compact space. Morse HV Drives provide the Drive Designer with a new concept in the transmission of power for high speed, high load applications.

Who invented roller chain?

Hans Renold
Roller chain/Inventors

19th Century Way back in 1880 when the few cyclists on the roads were more than likely riding high on a Penny Farthing, young engineer Hans Renold achieved a significant technical breakthrough when he invented the bush roller chain.

In what situations silent chains are preferred?

When used in power transmission applications, silent chains are able to transmit loads at speeds in excess of other types of chains and belts. In addition, silent chain drives transmit power more efficiently and with less noise and vibration.

What is a silent chain drive?

A silent chain is essentially an assemblage of gear racks, each with two teeth, pivotally connected to form a closed chain. The links are pin-connected, flat steel plates with straight teeth. Silent chains are quieter than roller chains, can operate at higher speeds, and can transmit…

What size is a 40 chain?

40 Roller chain made to ANSI b 29.1 is 1/2″ or 12.7 mm pitch. It is available in single strand 40-1 duplex 40-2 and triplex 40-3.

What size is a 50 chain?

#50 Roller Chain Dimensions

Size Pitch (P) Overall Width (A)
50-2 0.625″ 1.513″
50-3 0.625″ 2.230″
50-4 0.625″ 2.943″

What are the types of failure in roller chains?

Handling Roller Chain/Sprocket Identifying and Correcting Problems

Problem Potential cause
Fatigue Failure Loading is greater than chain’s dynamic capacity
Cracking Stress corrosion cracking
Broken Rollers Foreign material between chain and sprocket Fatigue failure
Worn Plates Bottom of plates worn due to rubbing on guides

What are the components of a Morse Hy-Vo chain?

Morse Hy-Vo Chain 2 Chain Components • Link Apertures: Holes in Links either round or Rocker Joint shaped to match the connecting Pins. This is the area of articulation in the chain. • Guide Link: Link plate positioned on the outside of the chain. This pilots the chain on the sprocket.

What’s the Morse code for an automatic transmission?

Application Listings for Morse Hy-Vo Chain Automatic Transmission Chains Transmission Description Year Morse Part Number General Motors 125/125C3/8 Pitch x 3/4 Wide x 84 Pitches]

Is the Hy-Vo chain a trademark of BorgWarner?

MORSE, HY-VO, BorgWarner and are registered Trademarks of BorgWarner Inc. All Rights Reserved. Copyright 2002 BWA Compliments of: BorgWarner Morse TEC Sales Office: (248) 754-0182 MT2002.AP August 2002 bwhyvo.fm Page -1 Monday, August 7, 2000 3:21 PM Morse Hy-Vo Chain

What are the different design styles of Morse?

Application Specific Design Styles: Morse offers a full line of applications which include round pin, three styles of rocker joint pin chain, ET guide links, and the new patented Morse Gemini®system. Each of these are specified by application based upon loads, operating conditions, and operating space.