What is the Check Engine Light code on a Honda Element?

What is the Check Engine Light code on a Honda Element?

HONDA ELEMENT CHECK ENGINE LIGHT CODE STRUCTURE First DigitPxxxx  PowertrainBxxxx  BodyCxxxx  ChasisUxxxx  Class 2 NetworkSecond DigitP0xxx  Government-Required CodesP1xxx  Manufacturer Codes for Additional Emission System Function; Not Required but Reported to the GovernmentThird DigitPx1xx  Air-Fuel

Where can I find the Check Engine Light code?

You may also retrieve Honda check engine light codes using the Malfunction Indicator Lamp (MIL), by counting the flashes as follows: 1. Connect SCS service connector special tool No. 07PAZ-0010100, or equivalent, to service check connector located under the passenger’s side of dash.

What does p0041 mean on a Honda Element?

P0041    Downstream oxygen sensors swapped from bank to bank P0042    HO2S heater control circuit (Bank 1 Sensor 3) P0043    HO2S heater control circuit low (Bank 1 Sensor 3) P0044    HO2S heater control circuit high (Bank 1 Sensor 3)

Where is the service check light code on a Honda?

1. Connect SCS service connector special tool No. 07PAZ-0010100, or equivalent, to service check connector located under the passenger’s side of dash. 2. Turn the ignition on. 3. MIL will indicate DTC’s by outputting a number of flashes.

HONDA ELEMENT CHECK ENGINE LIGHT CODE STRUCTURE First DigitPxxxx  PowertrainBxxxx  BodyCxxxx  ChasisUxxxx  Class 2 NetworkSecond DigitP0xxx  Government-Required CodesP1xxx  Manufacturer Codes for Additional Emission System Function; Not Required but Reported to the GovernmentThird DigitPx1xx  Air-Fuel

How do you find the Diagnostic Code on a Honda OBD?

Turn ignition switch to ON position. Diagnostic Trouble Codes (DTCs) will be indicated by a series of long and short flashes on the Malfunction Indicator Lamp (MIL). The number of long flashes indicates the number in the 10s column. The number of short flashes indicates the number in the 1s column.

1. Connect SCS service connector special tool No. 07PAZ-0010100, or equivalent, to service check connector located under the passenger’s side of dash. 2. Turn the ignition on. 3. MIL will indicate DTC’s by outputting a number of flashes.

You may also retrieve Honda check engine light codes using the Malfunction Indicator Lamp (MIL), by counting the flashes as follows: 1. Connect SCS service connector special tool No. 07PAZ-0010100, or equivalent, to service check connector located under the passenger’s side of dash.

What do the codes mean on Honda OBD?

The codes are defined as to what system is affected. When possible we give the more commonly known OBD II component name. This information combined with proper testing procedures, specifications, and tools like a digital multimeter can help you fix the vehicle right the first time. OBD diagnostic does not have to be difficult or inconclusive.

What is the code for the cylinder deactivation system?

The code was p3400, cylinder deactivation system. When I try to start the car it sounds like the timing belt broke or like there is no compression Trying to find out where should I start first identify these codes and the solution for them…..

What are the trouble codes for Honda OBD-2?

Honda Specific Trouble Codes Code Description P1106 Barometric Pressure Circuit Range/Perfor P1107 Barometric Pressure Circuit Low Input P1108 Barometric Pressure Circuit High Input P1121 Throttle Position Lower Than Expected

What are the codes on a 2006 element?

I am looking to buy a 2006 Element, and this morning I had it checked out a mechanic’s shop (I’m not very handy with cars, unfortunately). The car is in great shape, but two codes showed up that left the mechanic scratching his head: 61-1 and 62-1.

Where to find OBD I code on Honda Civic?

Honda Motor Corporation OBD I diagnostic trouble codes are retrieveable without any special tools by simply following the instructions here. The codes are listed for Accord or Civic models seperately when required. The codes are defined as to what system is affected. When possible we give the more commonly known OBD II component name.

What kind of fuel does a Honda Element use?

Fuel (gal.) *Based on 2004 EPA mileage estimates. Use for comparison purposes only. Actual mileage may vary. Fuel (gal.) *Based on 2004 EPA mileage estimates.

What are the warning lights on a Honda?

The following are warning lights and indicators found in vehicles built by Honda. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray).

What to do when Honda Element Light comes back on?

I’d suggest giving the engine a “shot” of Marvel Mystery Oil just for good measure. (Especially if the light comes back on.) You might also put a “shot” in the gas tank to lube and clean the injectors. This thread is germane. I’m not sure Marvel Mystery Oil is going to help.

Fuel (gal.) *Based on 2004 EPA mileage estimates. Use for comparison purposes only. Actual mileage may vary. Fuel (gal.) *Based on 2004 EPA mileage estimates.

What’s the problem with Honda Element engine code p2646?

FYI, if the screens are not restricted so terribly bad and the actual problem (P2646) is a sticking spool valve in the VTEC (or sticking solenoid) a Bucks worth of Marvel just might correct the problem or possibly help dissolve some of the gum (or gunk) trapped in the screens.

I am looking to buy a 2006 Element, and this morning I had it checked out a mechanic’s shop (I’m not very handy with cars, unfortunately). The car is in great shape, but two codes showed up that left the mechanic scratching his head: 61-1 and 62-1.

What is the failure code on a Honda?

This failure code is stored in most Honda’s that we scan. Usually it is code 61-1. It comes from low voltage during cranking. The codes do not erase themselves so all it takes to have the code is one event where the battery was low on charge during cranking.

P0041    Downstream oxygen sensors swapped from bank to bank P0042    HO2S heater control circuit (Bank 1 Sensor 3) P0043    HO2S heater control circuit low (Bank 1 Sensor 3) P0044    HO2S heater control circuit high (Bank 1 Sensor 3)

What should I do if my Honda Element Light comes back on?

Turn on the engine of your Honda Element once again. If the light comes back on, this signifies a critical error and the car should be taken in for service right away. If not, you can ask a local auto shop or mechanic to look up what the error code means. Then, decide if you want to fix it now or later.

How do you turn off the engine on a Honda Element?

Write down the error code. Use the reset function on the scanner to tell the car’s computer to turn of the light. Unplug the scanner and turn off the engine. Wait one to two minutes and then start the car again. The light should remain off. Turn on the engine of your Honda Element once again.

How do you reset a Honda Element scanner?

Use the reset function on the scanner to tell the car’s computer to turn of the light. Unplug the scanner and turn off the engine. Wait one to two minutes and then start the car again. The light should remain off. Turn on the engine of your Honda Element once again.

What is p0302 trouble code Honda Element?

P0302 is a relatively common Honda Element trouble code. It stands for: P0302 is certainly a cause for concern, and can be a threat to the drivability the Honda Element.

How to read a check engine light code?

How to Read Codes From Your Check Engine Light (For Older Cars) Step 1: Find Your Vehicle’s Diagnostic Plug . The first step is to find your vehicles diagnostic plug. The one in my car was a small blue plug that was Step 2: Bridge the Wires. Step 3: Watch the Flashing Light and Decipher the Code.

Why no check engine light?

The MIL or check engine light illuminates ONLY when there is an emissions failure. It is possible to have a code stored without a check engine light, but it is not possible to have a check engine light without a code. Emmission failures are any failure that increases the car’s emissions beyond the EPA’s allowable specs.

What are check engine light codes?

A flashing check engine light means pull over and tow the vehicle to prevent damage. The P0400 codes relate to the emissions system and fuel vapor leaks (Gas Cap Codes). These in my opinion remain common and can experience intermittent failures.