What is the fault code for a TL1000S?
TO sensor, wiring/coupler connection. CKP sensor (pick-up coil) signal is produced but signal from ignition coil is not produced continuous two times. In this case, the code c24 (for front cylinder) is indicated. c25 is indicated if rear cylinder fails. Ignition coil, wiring/coupler connection, power supply from the battery.
What is the CKP code on a TL1000S?
CKP sensor (pick-up coil) signal is produced but signal from ignition coil is not produced continuous two times. In this case, the code c24 (for front cylinder) is indicated. c25 is indicated if rear cylinder fails. Ignition coil, wiring/coupler connection, power supply from the battery.
What should the idle speed be on a TL1000S?
The proper idle speed is 1200 RPM. Adjust the idle using the throttle lever stop screw. The screw is a black plastic knob mounted to the frame above the left engine cover. Set the idle speed once the engine has warmed to operating temperature. This is 160′ to 190′. The LCD on the tachometer will display the temperatures.
What’s the difference between a four cylinder motorcycle and a TL1000S?
The TL1000S will have different running characteristics than four cylinder motorcycles, especially at lower engine speeds. When riding the TL1000S, the operator can feel the power pulses the engine produces from idle to 4000 RPM.
What does the Suzuki Fi flashing light code mean?
It means there could be a possible serious abnormality of the sensor signals and the ECM has determine it is unsafe to run the engine until you get it checked. When this happens the instrument cluster reads “FI” continuously and the FI led will flash.
Why are there red lights in the back of F1 cars?
Subsequently, the F1 cockpits have additional lights attached in the rear wing too. They, too, help boost the visibility of the racers on the track. Furthermore, the rear red lights have a warning function too. In pleasant weather, when the red light flashes in any cockpit, it indicates that the car is moving at a relatively slower pace than usual.
What does the flashing light on the Suzuki M50 mean?
According to the M50 service manual, when the FI flashes and the engine shuts off or won’t start. It means there could be a possible serious abnormality of the sensor signals and the ECM has determine it is unsafe to run the engine until you get it checked. When this happens the instrument cluster reads “FI” continuously and the FI led will flash.
TO sensor, wiring/coupler connection. CKP sensor (pick-up coil) signal is produced but signal from ignition coil is not produced continuous two times. In this case, the code c24 (for front cylinder) is indicated. c25 is indicated if rear cylinder fails. Ignition coil, wiring/coupler connection, power supply from the battery.
Is the Suzuki TL1000R a V-twin bike?
The Suzuki TL1000 range feature one of the truly great V-twin engines, in some of the most unpredictable handling chassis ever devised. The Suzuki TL1000R has an improved rear shock, which doesn’t misbehave so much as the TL1000S model’s, but both motorcycles get so light at the front end, so very easily with all that V-twin grunt on tap.
What kind of fairing does a Suzuki TL1000R have?
The Suzuki TL1000R’s full fairing is fairly wide, especially at the top half, so it keeps some windblast off the rider. The TL1000R pillion perch is a bit of joke, footpegs are too high and the upswept pipes makes panniers impossible to fit. You get a steering damper as standard on the Suzuki TL1000R though…which is nice.
CKP sensor (pick-up coil) signal is produced but signal from ignition coil is not produced continuous two times. In this case, the code c24 (for front cylinder) is indicated. c25 is indicated if rear cylinder fails. Ignition coil, wiring/coupler connection, power supply from the battery.