What type of gas does a banshee take?
IF THE COMPRESSION IS 150 lbs to 165 lbs AT SEA LEVEL — you should run a minimum of 50/50 110 octane race fuel and 92 octane pump gas, but would be fine to also run straight race fuel. IF THE COMPRESSION IS GREATER THAN 165 lbs AT SEA LEVEL — you should use straight 110 octane race fuel.
How much is a gallon of yamalube gas?
You want to mix 2.6 ounces of oil to one gallon of gasoline for a 50:1 mixture. If you’re mixing up two gallons of gasoline you will have to mix 5.2 ounces of oil to two gallons of gasoline for a 50:1 mixture. I would recommend using fresh gasoline that has an octane rating of 89.
Who makes the best two stroke oil?
Best 2 Stroke Oils Reviews
- Briggs & Stratton 2-Cycle Oil.
- Pennzoil Marine XLF Engine Oil.
- Husqvarna 2 Stroke Oil.
- Klotz Super TechniPlate Synthetic 2-stroke Premix Oil.
- Motul 800 2T Factory Line 2 Stroke Engine Oil.
- Echo 2-stroke Oil.
- Lucas 2-Cycle Oil.
- Maxima 2-Stroke Oil.
What kind of gas do you use for a banshee?
I am aware that the ratio for my Banshee is 32:1. I bought 1 pint of Yamalube 2 stroke oil and i filled my gas bottle with 5 gallons of premium gas. Now, all i do is poor lube into gas and mix, right? i just want to make sure i do things right. Its been a while and i dont want to fuck anything up.
How much fuel is in a pint of Banshee fuel?
bansheesandrider 23. Half of a quart is a pint which is 16 ounces. If you mix this with 5 gallons of fuel, you nwill be at 40:1. If you want to be at 32:1, then you need to mix 1 pint with 4 gallons of fuel.
Where do I find the oil and gas mix?
The mixture of gas and oil is written as a ratio that represents the parts of gasoline and the parts of oil. The ratio needed in the 2-cycle oil mix for your engine can be found in the equipment operator’s manual or on the engine label.
What kind of fuel to mix with Yamalube?
With Yamalube, I would stay at 32:1, but if you go with a better quality oil such as Klotz, Maxima, Amsoil, etc. then I would go 40:1 as they offer much better protection than Yamalube. 9 years later… Factory specs foe fuel to oil mixture is 24:1 yamalube r or equivalent oil. 91 octane or higher.