When did Cummins start making the L10 engine?
The first L10 Cummins Engines were a mechanical style engine. Later the electronics were incorporated into the L10 Cummins Engines. The L10 Cummins Engines were produced from the mid 80’s to the late 90’s.
How big is a 10 liter Cummins Engine?
Dukes ; the L-10 is a 10 liter- 610 cu inches. Its claim to fame is light weight versus say a big block Cummins (855 cu.inch). I think an L-10 engine complete weighs around 1900 lbs vs about 2500 lbs for a 855 (N-14) It was replaced by the M-11.
Are there any Ford L10 Cummins 6 wheel tractors?
Thanks. I’m finding a motherlode of Ford L-9000 & LA Aeromax 6 wheel tractors with 260-280HP L-10’s & 275-300HP 3306 & 3176 cats w/ 9speer Fuller/Eaton Road Ranger trannies. Almost all have 250-400K on them and are fleet maintained tractors.
Which is the best Cummins motor for a truck?
The best motor available in trucks in this price range seems to be the Cat 3306 or the L11 Cummins motors. Had a L10 300HP in a 10wheeler i owend 52000 GVW It was great for just the dump [until you got to a hill] When I’d hang on the tag-along and the 953 CAT Forget-it.
Where does the blow by go on a Cummins Engine?
This blow-by must escape the crankcase by way of a breather tube. Years ago, back in the early 1980s, the breather tube on the older Small Cam and early Big Cam Cummins engines would clog from oil deposits and not allow the blow-by to escape the engine. Being that the blow-by continues, it has to go somewhere.
What to do if oil comes out of blowby tube?
When you block the blowby at high pressure the dipstick is the first place that blows out, your thumb will usually feel the higher than normal pressure instantly though. A manometer is cinch to make and will cost you 10¢. All you need is loop of clear tubing filled partially with water taped to a 1×4” and  a tape measure.
How many liters per minute in a Cummins turbo?
If using a manometer you will need to convert the inches of water to liters per minute (L/Min). Newer engines numbers are 63 liters per minute @ 2200rpm, 76 L/Min @ 2500rpm and 85 L/Min @ 2800rpm. Worn engine numbers are 126 L/Min @ 2200rpm, 152 L/Min @ 2500rpm, and 170 L/Min @ 2800 rpm.
Where are the timing marks on a L10 diesel engine?
This engine’s accessory pulley is broken, so the timing marks must be found using a dial indicator. This is a tool that is useful for mechanical engines, like the L10. The plunger of the dial indicator was set to rest on an injector rocker arm. The engine is then turned over by hand with a breaker bar.
Can you replace an injector on a Cummins L10?
It makes any necessary repairs easy. A Cummins L10 came in for injector replacement. Injector replacements are, generally speaking, an easy repair. You remove all parts in the way of pulling and replacing the injector and re-install all good working parts as they were. Not on a L10.
What kind of engine is a Cummins 350 E11?
1995 CUMMINS L10 ENGINES 300HP 100-0606191 – SN: 34739284 USED L10 CUMMINS ENGINE, RUNNING GOOD. CUMMINS L10 350 E11 ENGINE . Fits To: ERF EC11 Serial No: 70905 USED L10 CUMMINS ENGINE BLACK, WITH 300HP, CPL:1866, YEAR:1.995, COMPLETE, INSPECTED AND TESTED RUNNING ENGINE, ALSO MANY ENGINES IN STOCK.
How big are the bolts on a Cummins L10?
Cummins L10 Main Bearing Bolts Step 1 = 68 Nm, 50 lb.ft Step 2 = 142 Nm, 105 lb.ft Step 3 = 210 Nm, 155 lb.ft Step 4 Loosen all; Step 5 = 68 Nm, 50 lb.ft Step 6 = 142 Nm, 105 lb.ft Step 7 = 210 Nm, 155 lb.ft Click for Cummins L10 engine manuals and specs
How much does a Cummins L 10 Generator cost?
The current average price of a L 10 listing is $7,950. Cummins L 10 models are historically listed by sellers in Engines & Motors, Generator and Truck Parts categories. Cummins L 10 models make up % of historic Engines & Motors enquiries, and % of all Cummins enquiries.
What kind of engine does a Peterbilt dump truck have?
2006 PETERBILT 357 TRI-AXLE DUMP TRUCK, CAT C13, 470hp, Eaton Fuller 8LL Manual Transmission, 912242 Miles, 4.30, Haulmax Suspension with 6 Month Old Blocks, 20000lb Front Axle, 23000lb Rear Axle, See More Details
How much does a 1994 Cummins engine cost?
1994 CUMMINS L10 ENGINE 300 HP USED L10 CUMMINS ENGINE WITH 300 HP, COMPLETE TESTED RUNNING GOOD ENGINE, ALSO MANY ENGINES IN STOCK. USED L10 BLACK CUMMINS ENGINE WITH 260 HP, COMPLETE, INSPECTED AND TESTED RUNNING ENGINE, ALSO MANY ENGINES IN STOCK – FOR PRICE, CORE AND SHIPPING CONTACT US AT OR , ALSO VISIT 4-TRUCKS TO SEE A… See More Details
How much horsepower does a Cummins Engine have?
Cummins Engine Model: L10-310 Engine serial number: 34695653 Engine Total Distance on ECM: No miles available Advertised horsepower: 310 HP @1600 RPM Date of manufacture: 1993 Cylinder d… See More Details GOOD USED 1993 CUMMINS L10 TAKEOUT ENGINE FOR SALE. 1558 CPL #, 300 HP @ 1700 RPM.
What kind of engine does an International 8100 have?
International DT530 Engine, Automatic, Cold A/C, Headache Rack, Diesel, 275 hp, MD 3060/CR, Allison Trans, Spring Suspension, Steel Disc Wheels, New Steer Tires, 22′ Dump Bed, 100 in wide, 7 Slidin… See More Details 1993 International 8100 4X2 with a 1000 gallon fuel bed with small hydraulic crane.
Is there a rebuild manual for the L10 engine?
This manual contains complete assembly and rebuild specifications for the external damper model L10 engine and all associated components manufactured by Cummins Engine Company, Inc. This manual is intended as a quick reference guide for an experienced technician who is familiar with our product.
How big is an International 8100 yard dog truck?
18′ x 96″ Aluminum Grain Bed w/Tri-Fold Rear Cargo Doors and Roll Tarp, Bed runsills on 4.5″ center. 60″ Sides, Reece Hitch, Air Brakes, Tires at 75%+, VERY GOOD CONDITION AND WELL MAINTAINED. Hydraulic 5th wheel. Its set up as a street legal yard dog or spotter truck. 1 Cummins and 1 international eng both 9speed manuals.
Where can I find Cummins CELECT Plus ECM?
Cummins Celect+ ECM ECU PCM 3096662 Cummins M11, N14, L10 Engine Computer This ECM is found on all Cummins N14, M11 or L10 engines.
What kind of ECM do Cummins engines have?
Cummins ECM CPL Recalibration All Model Cummins Engines and ECM Part Number Computers Please .. You Are Buying A HDP Remanufactured Cummins Celect or CelectPlus Series .. You Are Buying A HDP Remanufactured 92 or a 60 Series Detroit Diesel Engine C..
What kind of CPL do I need for Cummins ECM?
Cummins ECM CPL Recalibration All Model Cummins Engines and ECM Part Number Computers Please .. You Are Buying A HDP Remanufactured Cummins Celect or CelectPlus Series ..
What causes engine oil to return to the fuel tank?
Engine oil returning to the fuel tank. I have a 2000 Cummins 8.3 ISC 350 in a motor home that is returning engine oil to the fuel tank. The problem started while making a vacation trip of 12K miles I first noticed a engine trouble light in Wy, and discovered I the engine was down 2 qts of oil.
Can a caps pump put fuel into oil?
The CAPS pump will only put fuel into the oil not oil into the fuel. fuel pressure in the pump is higher than engine oil pressure. try running some dye in your oil if you have a black light to confirm you are seeing oil in you fuel and not soot.