Where are the fuses located on a Saturn L?

Where are the fuses located on a Saturn L?

Saturn L-Series (1999 – 2004) – fuses box diagram Year of production: 1999, 2000, 2001, 2002, 2003, 2004 Floor Console Fuse Block The driver’s side instrument panel is located under the instrument panel on the driver’s left side. Saturn L-Series – fuse box – instrument panel (driver’s side) Fuses Usage RADIO Audio, OnStar®, Rear Seat DVD (Option

What causes a wiper fuse to burn out?

That way, if the motor is overloaded for any reason, the fuse will burn out first, instead of the more expensive wiper motor. If the wiper motor fuse burns out, check for any obstructions that may cause the motor to be overloaded.

Why are the wipers on my car not working?

Torn wiper blades, a bad wiper motor, a blown fuse, or heavy snow may be why your wipers are not working. Keeping your windshield clear is paramount to a safe driving experience.

How can I Disconnect the horn on my car?

How can I disconnect the horn on my car? To disconnect the horn, locate the fuse for the horn in the fuse box. Remove the fuse. The car will still operate normally without a horn. You can also remove the horn relay. You can disconnect the wires from the horn as well. Any of these methods will disconnect your horn and render it inoperable.

Saturn L-Series (1999 – 2004) – fuses box diagram Year of production: 1999, 2000, 2001, 2002, 2003, 2004 Floor Console Fuse Block The driver’s side instrument panel is located under the instrument panel on the driver’s left side. Saturn L-Series – fuse box – instrument panel (driver’s side) Fuses Usage RADIO Audio, OnStar®, Rear Seat DVD (Option

When did the Saturn Vue fuse box come out?

In this article, we consider the first-generation Saturn Vue, produced from 2001 to 2007. Here you will find fuse box diagrams of Saturn Vue 2001, 2002, 2003, 2004, 2005, 2006 and 2007, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

Where are the fuses and relays located on a Chrysler 300?

For the Chrysler 300/300C First generation 2004, 2005, 2006, 2007, 2008, 2009, 2010 model year. Front Power Distribution Center A power distribution center is located in the engine compartment. This center contains fuses and relays. legend. FUSE NO.

Where are the fuses located on an e320?

You can also see a list of all the fuses, their designation and layout. The fuse boxes shown below are apply to 1996 1997 1998 1999 2000 2001 2002, models E320 E420 E430 E55 AMG. The main fuse box is located on the left side in the engine compartment near the windshield. Here is a layout of the fuses in the main fuse box.

Where are the fuses in the SL R230?

SL R230 Fuse Box Locations in the engine bay on driver’s side in the engine bay on passenger’s side in the passenger compartment fuses box in the rear trunk

Where are the Maxi and ATO fuses located?

The ATO and MAXI fuses are installed on the fuse box panels. If you would like to save on these fuses, you can purchase a box with 100+ fuses for only a few dollars on Amazon. In the passenger compartment located behind the passenger’s seat, you will find a fuse box. This is where the rear SAM Control Unit N10/8 is located as well.

Where are the fuses located on a Honda Accord?

The ATO and MAXI fuses are installed on the fuse box panels. If you would like to save on these fuses, you can purchase a box with 100+ fuses for only a few dollars on Amazon. In the passenger compartment located behind the passenger’s seat, you will find a fuse box.

Where are the fuse panels on a Saturn L100?

In this article, you will find fuse box diagrams of Saturn L100, L200, L300, LW200, LW300 2003, 2004 and 2005, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

When did the Saturn Ion fuse box come out?

The compact car Saturn Ion was produced from 2002 to 2007. In this article, you will find fuse box diagrams of Saturn Ion 2003, 2004, 2005, 2006 and 2007, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

What to do if your Saturn SL has a blown fuse?

Learn how to diagnose and fix minor oil leaks in your car 2000 Saturn SL 1.9L 4 Cyl. Check for a blown engine fuse Odd electrical problems that come out of nowhere can often signify a blown engine fuse – check and change yours here! 2000 Saturn SL 1.9L 4 Cyl.

Where is the fuse on the instrument panel?

The instrument panel fuse block is located behind the panel on the driver’s side of the central console. Loosen the screw on the cover and remove the cover. It is located in the engine compartment (left-side), under the cover. How to check the fuses? How to replace a blown fuse? Why do car fuses blow?

What do you need to know about the wiring on a Saturn?

These Saturn Wiring information / Aftermarket Autostart/Alarm Technical Wiring Diagrams are very useful, if not required, for the installation of alarms, autostart / alarms, remote starts, doorlock info and any other aftermarket installation that would require you to know the / Wire Information / Wiring Information of your Saturn

Where can I find a Saturn Workshop Manual?

To narrow down your search please use the dropdown box above, or select from one of the available vehicles in the list below. Our Saturn Automotive repair manuals are split into five broad categories; Saturn Workshop Manuals, Saturn Owners Manuals, Saturn Wiring Diagrams, Saturn Sales Brochures and general Miscellaneous Saturn downloads.

Where is the starter solenoid located on a car?

Most often, a true starter relay is a small black cube plugged into an electrical fuse/relay box in the engine compartment, whereas a starter solenoid is (in most cases) attached directly to the starter on the engine (although it is sometimes located elsewhere in the engine compartment). Signs of a bad starter solenoid

Can a bad starter relay be a solenoid problem?

Sometimes the starter itself is the problem. Electrical issues can be annoying and inconvenient. They can also be hazardous and can cause damage. If you run into symptoms of a bad starter relay or solenoid with your car, truck, or SUV, make sure to have a trusted technician to diagnose the specific problem.

Are there any 30 amp automotive fuses at Walmart?

ATC Fuses / Blade Fuses / ATO Fuses / Automotive Fus 25 pack 30 Amp ATC Fuse Blade Style 30A Automotive C Bussmann BP/AGC-30-RP AGC Automotive Glass Fuse (1/4 K Tool International KTI-00851 30 Amp Glass Automoti Bussmann BP/ATM-30ID Green ATM 30 Amp easyId Illumin 25 pack 30 Amp ATC Fuse Blade Style 30A Automotive C

How much is a 30 Amp Fuse blade?

Product – 25 pack 30 Amp ATC Fuse Blade Style Scosche 30A Automotive Car Truck Product Image. Price $8.99. Product Title 25 pack 30 Amp ATC Fuse Blade Style Scosche 30A Automotive Car Truck. There is a problem adding to cart.

What to do if your tail light bulb is burnt out?

If the bulb is burnt out, you’ll need to replace it. Take it to your local auto store and buy the correct model for your car. If the bulb is fine, your car may have a deeper electrical problem. If the fuse, taillight wires, and bulb are all in good shape, it’s time to take the car to the mechanic.

When do you need to replace a tail light fuse?

On most new cars, the fuse would have to be removed to be checked due to the arrangement of the fuses. If the piece of metal inside the taillight fuse is intact, the fuse is still good. If the piece of metal looks broken or fractured, the fuse is blown and will need replacing.

How do you repair an interior fuse box?

1. Getting Started – Prepare for the repair 2. Remove Cover – Locate interior fuse box and remove cover 3. Locate Bad Fuse – Find the fuse that is tied to the bad component 4. Remove Fuse – Take out the fuse in question and assess if blown 5. Test Component – Secure the cover and test component 6. More Info.

When did the first Saturn SL come out?

The first generation SL was constructed for model years 1991 through 1995, with the first Saturn to leave the assembly line in the Spring Hill, Tennessee factory was on July 30, 1990, the same day that then-CEO of GM, Roger Bonham Smith, retired. It was maroon with a tan interior.

What kind of car was the Saturn s?

The Saturn S-series was a family of compact cars from the Saturn automobile company of General Motors. Saturn pioneered the brand-wide “no haggle” sales technique. The automobile platform, the Z-body, was developed entirely in-house at Saturn, and it shared very little with the rest of the General Motors model line.

What kind of engine does a Saturn SL1 have?

The SL1 trim level featured the option of the same MP2, or the MP6 automatic transmission. Both were offered only with the SOHC 1.9L I4 “LKO” engine that produced 85 hp (63 kW), which was rated at 27 mpg (8.7L/100 km/32 mpg) City, 34 mpg (6.9L/100 km; 41 mpg) Highway.

Where can I find a Saturn car manual?

SATURN Car Manuals PDF above the page – Sky, Aura, Astra, Outlook, Vue . Saturn Corporation – an American company, founded in 1984, working under the car manufacturing. The administration of the company is located in Troy, which produced cars.

When did Saturn stop making the s series?

In 1999 he came out of the production of the second generation of electric vehicles, but in 2003 this production was completely discontinued. All purchased cars were seized from the owners and disposed of. S-series cars have been developed in parallel with the electric vehicles, which belong to the middle class, but better and more convenient.

What kind of engine does a Saturn CV1 have?

But in comparison with other models of S-series it was not so popular and widespread. In Detroit in 2000 was presented to the minivan – Saturn CV1 Concept, is equipped with all-wheel drive and the engine 137 hp with the automatic transmission.

Where is the fuse box on a Honda S2000?

In this article, you will find fuse box diagrams of Honda S2000 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 and 2009, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay. The interior fuse box is underneath the dashboard on the driver’s side.

What is the name of the fuse box?

Fuse box diagram Name Usage ECM/TCM Battery Voltage to ECM, TCM, PCM (3.5L V BATT FEED Instrument Panel Fuse Box HORN Horn * * Emissions

What to do if your power window fuse is not labeled?

If the fuse box isn’t labeled, check the owner’s manual to see which fuse is the culprit.

Why is the fuel pump relay not turning on?

The ECM controls the fuel pump relay and this relay will only energize when commanded on. Does the check engine light come on; if not, then the ECM is not turning on. Do all the other combination meter warning lights come on?

What should I do if there is no power in my fuel pump?

A test of the battery with a digital tester that provides current voltage, cold cranking amps, and state of health should be done first. The battery is the heart of the electrical system and if it stumbles or fails, it can affect all other systems.

What are the warning lights on a Saturn?

The following are warning lights and indicators found in vehicles built by Saturn. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray). There are over 30 of them, so search carefully!

Where are the fuses on a car alarm?

Fuse boxes usually have a fuse diagram on the lid of the fuse box. Most alarm fuses have an alarm label on them. If the fuse is not labeled, consult your owner’s manual for the location of the alarm fuse. Tip: Some vehicles have multiple fuse boxes – check your owner’s manual for the location of the various fuse boxes. Remove the fuse.

How do you shut down a car alarm?

Step 4: Pull the fuse. A factory-installed alarm will have a fuse in the fuse box; pull the fuse to cut the circuit and shut down the alarm. Look for the fuse box on the left hand side of the steering column. Fuse boxes usually have a fuse diagram on the lid of the fuse box. Most alarm fuses have an alarm label on them.

How does the security system work on a Saturn Ion?

The Ion uses a passive alarm system that arm when you exit the vehicle and lock the doors with the keyless remote. If at any time the doors are opened without the use of the remote or the keys the alarm will sound. This is to prevent the theft of contents within the car.

How do you reset passkey on Saturn Ion?

Resetting the PASSKEY can be necessary at times if the programming in the module becomes corrupted or if a new key and key cylinder are installed. To reset the system, get in the car and shut the door. Turn the key on to the “Run” position without cranking the engine. Leave the key there for exactly 10 minutes.

How do you turn off the engine on a Saturn Ion?

Turn the key to the off position without removing it and back to “Run” for 10 more minutes. Turn the key off again and back to “Run” for 10 minutes a third. Turn the key off and then attempt to start the engine.

What happens when the intermittent wiper relay fails?

When all of the components involved in the windshield wiper blades work correctly, the system is very convenient. However, when one part malfunctions, it can cause potential safety concerns. One of the most common parts to fail is the intermittent wiper relay switch.

Why does my car not have a wiper motor?

This is usually caused by the wiper motor not getting the power that it needs due to a bad relay. In most cases, a professional mechanic will replace the intermittent wiper relay and the controls at the same time to ensure all of the supporting connections work smoothly together.

Why does my car wiper make a humming noise?

Humming noise when the wipers are on In some instances, you may notice that there is a strange humming noise when trying to operate the wipers on the car. This is usually caused by the wiper motor not getting the power that it needs due to a bad relay.

Where do I find the fuse on my air conditioner?

To examine your fuses, look for a switch near the compressor of your unit. Before you open the compartment, turn off the electricity source of your entire air conditioning unit. Turn off the circuit breaker that controls your air conditioner. Once the circuit breaker has been turned off, turn off the switch in your unit.

How to troubleshoot the air conditioner in a Saturn s?

Before you start troubleshooting the AC, you’ll want to make sure that the outside temperature is above forty degrees. Then start the car, put the fan switch on, and push the AC button in. Now you should see the compressor clutch in the AC system spinning. If it isn’t, you need to find out why not.

What happens if you don’t replace fuses on your air conditioner?

It is very important that the fuses are properly positioned in their clamps. If the wires of the clamps are not appropriately set on the terminals of the fuses, your air conditioning unit still won’t work. To find out if you were able to replace your fuses properly, turn on the circuit breaker of your unit as well as the thermostat.

In this article, we consider the first-generation Saturn Vue, produced from 2001 to 2007. Here you will find fuse box diagrams of Saturn Vue 2001, 2002, 2003, 2004, 2005, 2006 and 2007, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

Before you start troubleshooting the AC, you’ll want to make sure that the outside temperature is above forty degrees. Then start the car, put the fan switch on, and push the AC button in. Now you should see the compressor clutch in the AC system spinning. If it isn’t, you need to find out why not.

How is the compressor clutch relay turned on and off?

In some vehicles the compressor clutch relay is turned on and off by the low pressure switch and the evaporator temperature sensor. In a computer controlled system, the compressor clutch relay is grounded by the computer. If the fuse is good, disconnect the electrical connector from the compressor clutch coil.

Where are the fuses for the dashboard lights?

Check under the hood, under the dashboard, or near or in the glove compartment. Once you find the fuse box or boxes, remove the lid and check the diagram on the underside of the lid for a fuse labeled “dash lights” or just “lights.” Refer to your owner’s manual if you have trouble locating the fuse boxes or the dashboard light fuse.

Why are the lights on my dashboard not working?

Adjust the dial or knob to see if that fixes the problem. If the switch was accidentally bumped, your dashboard lights might have been turned off. Flip the switch or turn the dial or knob up and see if the lights on your dash come on or get brighter. If adjusting the switch doesn’t work, you may have a blown fuse or bad lightbulb.

Where is the dimmer switch on the dashboard?

Locate the dimmer switch for your lights. Most vehicles have a dashboard light control switch that will dim the dashboard lights as well as turn them off. Find the control switch, dial, or knob, which is generally located on the console near the steering column or may be part of the headlight switch.

What to do if your car dashboard lights are not working?

Removing the old fuse and replacing it should get the lights working again. While the new fuse may do the trick, it could also indicate a deeper electrical problem. If the new fuse doesn’t last long, have it inspected at an authorized Chevrolet service center since you may have a deeper problem in the electrical system.

Why are the dashboard lights dim in my Chevy?

If the dashboard lights in your Chevy are dim, chances are you can fix it yourself. If it’s light out, make sure that the headlights aren’t turned on. Many headlights often dim the dash automatically when they’re switched on, so this might be the cause of the problem.

Where is the control arm assembly on a Saturn SL2?

Control Arm Assembly, Rear Lower Rearward Driver or Passenger Side… Control Arm with Ball Joint Assembly, Front Lower Passenger… Control Arm with Ball Joint Assembly, Front Lower Driver and…

Where can I buy Saturn parts for my car?

RockAuto ships auto parts and body parts from over 300 manufacturers to customers’ doors worldwide, all at warehouse prices. Easy to use parts catalog. SATURN Parts | RockAuto

Where is the SRS airbag control module located?

In most GM cars it is under the driver or passenger seat. Disconnect the positive battery cable and wait 3 min. You are now safe to unplug the airbag control module harness wiring plugs. All airbag srs components must be installed and connected properly before installing the airbag control module.

Where can I get the best Saturn parts?

At 1A Auto, we can get you the right Saturn parts for your car. You’ll find a large selection of new, high quality aftermarket Saturn auto parts, including door handles, mirrors, tail lights, headlights, radiators, and much more.

When did the last Saturn car come out?

Though the Saturn brand was discontinued in 2009 and production has since ended, if you are in need of a replacement part for your Saturn, then you’ve come to the right place! At 1A Auto, we can get you the right Saturn parts for your car.

Is there an aftermarket replacement for a Saturn?

If we wouldn’t put the part in our own cars, we won’t sell them to anyone else. A new aftermarket replacement Saturn part from 1A Auto will save you 30-50% on average over a comparable new OEM replacement Saturn part that you would get at a dealership, and our new aftermarket Saturn parts are also extremely durable and reliable.

How do you replace a blown fuse in a car?

If the fuse box is in a dark place, use a flashlight to locate the blown fuse. Remove the broken fuse and replace it. Using needle-nose pliers or some small tweezers, remove the broken fuse and in its place replace with a new fuse. Here is a quick video on how to replace the blown car fuse.

Why does my Fuse keep blowing in my car?

A number of things can lead to a fuse keeps blowing in a car and all have to be checked and repaired to avoid spending more on the fuses. The common issue with fuses blowing would be because of faulty wiring. The faulty wiring or even the defective wiper motors would often lead to the excessive current flow in a system.

What to do if your fuse box breaks?

This shows that the fuse melted its metal filament to break the circuit. If the fuse box is in a dark place, use a flashlight to locate the blown fuse. Remove the broken fuse and replace it. Using needle-nose pliers or some small tweezers, remove the broken fuse and in its place replace with a new fuse.

The compact car Saturn Ion was produced from 2002 to 2007. In this article, you will find fuse box diagrams of Saturn Ion 2003, 2004, 2005, 2006 and 2007, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

What is the canister purge solenoid on a Saturn Ion?

Canister Purge Solenoid, Mass Airflow Sensor, Low Coolant Switch, Oxygen Sensors, Air Pump Relay Coil WARNING: Terminal and harness assignments for individual connectors will vary depending on vehicle equipment level, model, and market.

The instrument panel fuse block is located behind the panel on the driver’s side of the central console. Loosen the screw on the cover and remove the cover. It is located in the engine compartment (left-side), under the cover. How to check the fuses? How to replace a blown fuse? Why do car fuses blow?

Canister Purge Solenoid, Mass Airflow Sensor, Low Coolant Switch, Oxygen Sensors, Air Pump Relay Coil WARNING: Terminal and harness assignments for individual connectors will vary depending on vehicle equipment level, model, and market.

Where can I find used Saturn engine parts?

When you need Used Saturn Parts in a flash, we have partnered with all major shipping and freight carriers to ship any used part, used engine, used transmission, and more to any address in the United States. If our local salvage yards do not have your used part in stock, we will find it using our used auto parts locator tool at no charge to you.

Who is the owner of the 2004 Saturn Vue?

2004 Saturn VUE Owner ManualM SATURN, the SATURN Emblem, and the name VUE are registered trademarks of Saturn Corporation. GENERAL MOTORS and GM are registered trademarks of General Motors Corportation. This manual includes the latest information at the time it was printed.

How do you lower the seat in a Saturn Vue?

•Move the seat forward or rearward by moving the control forward or rearward. •Raise or lower the seat by sliding the control up or down. •Raise or lower the front portion of the seat by sliding the front of the control up or down. •Raise or lower the rear portion of the seat by sliding the rear of the control up or down. 1-3 Manual Lumbar

To narrow down your search please use the dropdown box above, or select from one of the available vehicles in the list below. Our Saturn Automotive repair manuals are split into five broad categories; Saturn Workshop Manuals, Saturn Owners Manuals, Saturn Wiring Diagrams, Saturn Sales Brochures and general Miscellaneous Saturn downloads.

Which is the most used car in Saturn?

The vehicles with the most documents are the Vue, Aura and Relay. These cars have the bulk of our PDF’s for this manufacturer with 86 between the three of them. The most visited and downloaded cars from the Saturn range are the Vue and the Vue

How does the air conditioner solenoid system work?

It works by allowing air into a charcoal-based canister which becomes pressurized when vapor enters the chamber. Once the solenoid is triggered, air is introduced to the EVAP and relieves pressure on most US and domestic cars, trucks and SUV’s.

Are there any problems with the Saturn’s series?

Saturn experimented with making these out of plastic, it was a huge failure. ALL of them failed, if you still own one of these cars and it hasn’t been replaced, it has failed. Symptoms include hard starting, rough idle, temperature gauge not working, awful fuel economy, poor performance, and stumbling, among many other things.

Why is my fuel pump not working on my Saturn s?

This is caused mainly by overdrawing from the 12v socket, or high power aftermarket accessories drawing from the same circuit. There will be melted plastic around the fuse. The radio, chime module, dome light, 12v socket, and fuel pump are on this circuit. You will probably know about it when the fuel pump stops working.

What causes a Saturn’s to slam into reverse?

This causes the car to “slam” into reverse and/or harsh upshifts, depending on which is worn. It will eventually destroy the line pressure solenoid, which will make for very hard upshifts. If left for a while, it will knock the input shaft nut loose, further worsening the condition of the shifts.

What should I do if my car fuse keeps blowing?

The important thing is to understand what is causing the fuse to keep blowing. The simple fix is often replacing the blown fuse and test the car again. If the fuse does not blow, it might be an easy fix because there was a power surge in the system.

Why does my air conditioner keep blowing fuses?

A third possibility is that high demand (i.e. high temperatures) is forcing your system to work harder to push conditioned air through a dirt-clogged HVAC filter, which in turn is putting extra pressure on the system and blowing the fuse. Occasionally, a dirty condenser coil can have a similar effect.

Where are the fuses located in a car?

Depending on the car, the fuse panel location and components would vary. You would find one of the boxes in the engine compartment while another one under the steering wheel. You are required to use the owner’s manual to find the exact location. Take off the panel’s cover. To access the fuses, you have to open the panel’s cover.

Why does my car say it has a bad starter solenoid?

Problems that might cause your car to act like it has a bad starter solenoid can include: Bad battery – If the battery voltage is low it will be unable to provide enough power to start your engine. Blown fuse – Sometimes the simplest explanation is the best one. A blown fuse in the starter circuit could be the cause of a no-start problem.

Why is my Fuse Box making a clicking noise?

This can be caused by a computer failure, resistance in the ground wire for the control side of the relay or high resistance in the power supply to the control side of the relay. To find out the source of the problem, you’ll need to run some quick tests using a multimeter.

Can a blown fuse cause a starter to not start?

Blown fuse – Sometimes the simplest explanation is the best one. A blown fuse in the starter circuit could be the cause of a no-start problem. Broken or corroded wiring – Damaged or dirty wires to the battery or to the starter solenoid (or wires that are loose) can prevent sufficient power from reaching the starter.

This can be caused by a computer failure, resistance in the ground wire for the control side of the relay or high resistance in the power supply to the control side of the relay. To find out the source of the problem, you’ll need to run some quick tests using a multimeter.

Problems that might cause your car to act like it has a bad starter solenoid can include: Bad battery – If the battery voltage is low it will be unable to provide enough power to start your engine. Blown fuse – Sometimes the simplest explanation is the best one. A blown fuse in the starter circuit could be the cause of a no-start problem.

Why does my solenoid make a clicking sound?

This could mean that the solenoid is trying to engage but that the internal components are stuck and unable to work properly. 3. Repeated “clicking” sounds usually indicate a dead battery. But a faulty solenoid that fails to make adequate electrical contact inside can also produce this tell-tale sound. 4.

What to do when your fuse box wont turn on?

Turn on the ignition key, then touch the positive lead of the multimeter to the negative battery terminal. If the voltage varies, the problem lies in whatever is supposed to activate the relay — the computer or a switch, for example. Inspect, the wiring for terminal No. 86 and make any repairs as needed.

What happens when the dashboard instrumentation cluster malfunctions?

A malfunctioning BCM will activate dashboard instrumentation cluster error and warning lights. These lights may flash off and on if the BCM is not able to read the sensors correctly.

How does a Body Control Module ( BCM ) work?

It streamlines the manufacturing and troubleshooting aspects of electronic modules by housing the modules into one, central unit instead of each function having its own device. It also coordinates the operating functions of many non-engine related ancillary items as well as security features.

What happens when a BCM is turned off?

Your vehicle performance may also be affected as the BCM communicates with other control modules in the vehicle. Parasitic drain is due to components in your vehicle continuing to run after the key is turned off.

How to troubleshoot a Saturn radiator fan and relay?

Check the fuse for the fan and relay. Remove the fan fuse under the dash. Open the fuse box by turning the knob on the fuse panel cover counterclockwise and pulling the fuse panel down. Remove the fuse for the fan with the supplied fuse puller (on the underside of the fuse box panel cover). Check to make sure that the fuse has not failed.

Where are the fuses located in the W210?

The main fuse box is located on the left side in the engine compartment near the windshield. Here is a layout of the fuses in the main fuse box. Fuses in the auxiliary fuse box located on the side of the dash. To access these fuses open the driver door and remove the side dash panel cover.

Check the fuse for the fan and relay. Remove the fan fuse under the dash. Open the fuse box by turning the knob on the fuse panel cover counterclockwise and pulling the fuse panel down. Remove the fuse for the fan with the supplied fuse puller (on the underside of the fuse box panel cover). Check to make sure that the fuse has not failed.

How do you remove a door panel from a Saturn?

Pull the bottom of the panel away from the door frame carefully and unfasten the plastic clips behind the door panel. Repeat the process for the top of the door panel until it is free from the door frame. Unhook the electrical speaker wires that are attached to the back of the speaker in the door panel.

RockAuto ships auto parts and body parts from over 300 manufacturers to customers’ doors worldwide, all at warehouse prices. Easy to use parts catalog. SATURN Parts | RockAuto

Though the Saturn brand was discontinued in 2009 and production has since ended, if you are in need of a replacement part for your Saturn, then you’ve come to the right place! At 1A Auto, we can get you the right Saturn parts for your car.

What to do if fuel pump fuse keeps blowing?

You can use a volt ohmmeter to measure the current draw of the pump and see if it is within factory specified limits.

When did I replace the fuel pump in my S10?

In April I replaced a fuel pump in my S10. When they replaced it , it blew a 20 amp fuse. They put in new fuse and it ran fine till this week. 5 months later. The fuel pump was bad and was replaced under warranty.

Can a fuel pump overload cause a problem?

If not, check the other loads on the fuel pump circuit as those other loads could be causing the problem (the overload). To check that refer to wiring diagram in Factory Service Manual.

What could cause fuse to keep blowing from fuel pump Chev?

In April I replaced a fuel pump in my S10. When they replaced it , it blew a 20 amp fuse. They put in new fuse and it ran fine till this week. 5 months later. The fuel pump was bad and was replaced under warranty. It continues to blow fuse and they can’t figure out what the problem is. Any suggestions? My car has 160000 miles.

In April I replaced a fuel pump in my S10. When they replaced it , it blew a 20 amp fuse. They put in new fuse and it ran fine till this week. 5 months later. The fuel pump was bad and was replaced under warranty.

Where is the fuel pump relay located on a car?

The fuel pump relay is an electronic component that is found on virtually all vehicles equipped with an internal combustion engine. It is often found in the fuse box located in the engine bay and functions as the primary electronic switch that controls power to the fuel pump. The fuel pump relay is usually controlled by…

Saturn experimented with making these out of plastic, it was a huge failure. ALL of them failed, if you still own one of these cars and it hasn’t been replaced, it has failed. Symptoms include hard starting, rough idle, temperature gauge not working, awful fuel economy, poor performance, and stumbling, among many other things.

What kind of spark plugs do Saturn’s series use?

Most copper plugs fit this description. Narrow fine wire electrodes almost always cause problems, usually a p0300 and running like the car needs new plugs. The easiest thing to do here is just use the OE spark plugs, they’re inexpensive and just work. NGK BKR5ESA-11 (DOHC) and BKR4ESA-11 (SOHC). These have a higher than normal failure rate.