Where is the PCV valve on my 2003 Kia Sorento?

Where is the PCV valve on my 2003 Kia Sorento?

1. Disconnect the ventilation hose from the positive crankcase ventilation (PCV) valve. Remove the PCV valve from the rocker cover and reconnect it tothe ventilation hose. The plunger inside the PCV valve should move back and forth. 2. If vacuum is not felt, clean the PCV valve and ventilation hose in cleaning solvent, or replace if necessary.

Where is the PCV located on a Kia?

Place the Kia in “Park” and allow the vehicle to cool for a half hour. This will prevent the valve and surrounding components from being too hot. Open the hood of the Kia and identify the PCV location. On Kia vehicles, the PCV is found below the plastic cover mounted on the top of the engine.

What kind of valve does a Kia have?

Kia Motors offers a range of vehicles including full-sized, mid-sized, compact sedans and SUVs. The positive crankcase ventilation valve, also called the PCV valve, within Kias removes gasses from within the engine. This prevents the vehicle from excess pressure buildup.

How do you remove a PCV valve from a car?

Remove the plastic casing. Loosen and remove the four screws securing the casing in place. You will now see the PCV valve on the rear left side of the engine. Pull the valve out of the rubber grommet using a pair of needle nose pliers. The valve will slide out easily, be careful not to damage the rubber grommet.

1. Disconnect the ventilation hose from the positive crankcase ventilation (PCV) valve. Remove the PCV valve from the rocker cover and reconnect it tothe ventilation hose. The plunger inside the PCV valve should move back and forth. 2. If vacuum is not felt, clean the PCV valve and ventilation hose in cleaning solvent, or replace if necessary.

Place the Kia in “Park” and allow the vehicle to cool for a half hour. This will prevent the valve and surrounding components from being too hot. Open the hood of the Kia and identify the PCV location. On Kia vehicles, the PCV is found below the plastic cover mounted on the top of the engine.

Where are the components in a Kia Sorento?

Variable Intake Solenoid (VIS) Valve 23. Fuel Pressure Control Valve 24. Canister Close Valve (CCV) 25. Ignition Coil 26. Main Relay 27. Fuel Pump Relay 28. Data Link Connector (DLC) [16-Pin] 29. Multi-Purpose Check Connector [20-Pin] 1. Engine Control Module (ECM) 2. Manifold Absolute Pressure Sensor (MAPS) 3. Intake Air Temperature Sensor (IATS)

Kia Motors offers a range of vehicles including full-sized, mid-sized, compact sedans and SUVs. The positive crankcase ventilation valve, also called the PCV valve, within Kias removes gasses from within the engine. This prevents the vehicle from excess pressure buildup.