Why does my car go forward and reverse at the same time?

Why does my car go forward and reverse at the same time?

The crack would open up when the trans oil was hot (and thinner), so when reverse was selected, it would also engage the forward drive gear at the same time (^ due to pressure bleed). So when forward and reverse are selected at the same time the transmission binds and the car ends up going nowhere fast. The more revs you give it the worse it gets.

Why is it having trouble moving in reverse?

So when forward and reverse are selected at the same time the transmission binds and the car ends up going nowhere fast. The more revs you give it the worse it gets. They replaced the main shaft and now the problem is gone. Read more at http://www.honda-tech.com/showthread.php…

Can a 4L80E Trans shift in reverse?

I’ve got a 1992 chevy 2500 4×4 6.5TD/4L80E 3.42 gear The trans shifts great in all forward gears, no codes, and locks up the torque converter as it should. no slipping whatsoever. When put in reverse it clunks like its engaging, then won’t move, no sign of moving. It clunks like its in, but 100% freewheels.

Why is my p4-p1 having trouble moving in reverse?

P4 – P1 100% transmission fluid is good. The other day I accelerated putting my foot flat on the petrol. After that me neutral is off center. When I shift it up to neutral I have to shift it little bit past neutral like 3-4mm then it takes and when I shift to reverse after about 4-5 secs it kicks hard into reverse.

Can a Chevy Silverado go in reverse FWD?

FWD gears work fine. will go in reverse once in awhile. removed transmission pan changed filter and chevy silverado No reverse in truck. FWD gears work fine. Vocational, Technical or Tra… Vocational, Technical or Tra…

What causes a car to have trouble moving in reverse?

Two things can be wrong, either your transmission has bad transmission fluid in it or has none, and that will tear up your gears and the second is rebuilding your transmission. This is cheaper than a whole new one and you only repair the injured parts.

What does it mean when your truck has no forward gears?

Suddenly, you have no forward gears in your vehicle. No signs of transmission issues before this. Your truck works strong in reverse, but no forward at all. It just feels like you’re in neutral. I read a lot of posts that scared me about how the planets and other expensive sounding parts of my automatic transmission were likely dead.

I’ve got a 1992 chevy 2500 4×4 6.5TD/4L80E 3.42 gear The trans shifts great in all forward gears, no codes, and locks up the torque converter as it should. no slipping whatsoever. When put in reverse it clunks like its engaging, then won’t move, no sign of moving. It clunks like its in, but 100% freewheels.

When does your car make a knocking noise when you reverse?

It only happens when my car is going backwards (whether in neutral or reverse) and it only happens once (within the first 2-5 seconds of backing up) but it never happens again no matter how far back I go…

Why does your car vibrate when you apply the reverse?

Your car vibrates when you engage the reverse gear, making you wonder what the problem is. Obviously, there’s a problem somewhere. The question is: where is the problem from?

The crack would open up when the trans oil was hot (and thinner), so when reverse was selected, it would also engage the forward drive gear at the same time (^ due to pressure bleed). So when forward and reverse are selected at the same time the transmission binds and the car ends up going nowhere fast. The more revs you give it the worse it gets.

Why is your car making noise when reversing?

This car making noise when reversing can occur due to the brake pads shifting to a new direction for travel. However, too much movement between the surface of the pad abutment and caliper can lead to continuous noise.

So when forward and reverse are selected at the same time the transmission binds and the car ends up going nowhere fast. The more revs you give it the worse it gets. They replaced the main shaft and now the problem is gone. Read more at http://www.honda-tech.com/showthread.php…

Why does the back of my Car drag?

It is also possible that you are mistaking a performance problem with the engine or transmission for wheel drag, in which case you can schedule an inspection with a certified technician, such as one from YourMechanic, in order to diagnose your acceleration problem.

How to reverse a string one by one?

Initially, reverse the individual words of the given string one by one, for the above example, after reversing individual words the string should be “i ekil siht margorp yrev hcum”. Reverse the whole string from start to end to get the desired output “much very program this like i” in the above example.

Are there any problems with the Mercedes transmission?

Including Engine, Transmission, ABS, Airbag, SRS, SBC Brakes, ESP, EPS, Air Suspension and more. In depth troubleshooting, but only works on MB cars. 2. Launch Creader X431 VII works in European, Asian and Domestic Cars.

When did Mercedes Benz start using 5 speed transmission?

The 5-speed transmission that was used between 1995 up to 2008 is one of the best transmission ever built. Now let’s see if we can help you troubleshoot your transmission. By continuing to read this article you agree to use this information at your own risk. Top 5 Mercedes-Benz Transmission Problems.

Why is my Mercedes-Benz transmission not shifting?

If cracks develop between the two chambers, coolant will mix with transmission oil and it will destroy the transmission. This has been a well-documented issue for Mercedes-Benz cars equipped with the Valeo radiators.

The 5-speed transmission that was used between 1995 up to 2008 is one of the best transmission ever built. Now let’s see if we can help you troubleshoot your transmission. By continuing to read this article you agree to use this information at your own risk. Top 5 Mercedes-Benz Transmission Problems.

What kind of transmission does a Mercedes Benz have?

Mercedes-Benz transmissions are very solid, and whole transmission replacement is very rarely needed. The 5-speed transmission that was used between 1995 up to 2008 is one of the best transmission ever built. Now let’s see if we can help you troubleshoot your transmission.

Where are the transmission codes stored in a Mercedes?

Specific codes related to the transmission are stored in the TCU (Transmission Control Unit) and come generic codes such as P0705 are stored in ECU (Engine Control Unit). You don’t need to pay anyone to read the codes; you can retrieve them yourself in a couple of minutes with the right OBD II scanner.

What makes a car shift gears in reverse?

Every automatic transmission has a valve body. This is large, maze-like component that directs the flow of hydraulic fluid to the valves. This is what allows a car to smoothly shift gears whenever the situation calls for it.

P4 – P1 100% transmission fluid is good. The other day I accelerated putting my foot flat on the petrol. After that me neutral is off center. When I shift it up to neutral I have to shift it little bit past neutral like 3-4mm then it takes and when I shift to reverse after about 4-5 secs it kicks hard into reverse.