Why does my sunroof only go to the vent position?
The sunroof will only go to the vent position or only slide open. This concern can happen if the sunroof control module and sunroof motor are not timed correctly. To time the sunroof motor and control module, follow the instructions below. 1. Using the vehicle switches, move the sunroof glass panel as near to the closed position as possible. 2.
Can You recalibrate the sunroof on a 2005 equinox?
Step 1. Press the vent button on right to open. Step 2. Hold the Vent open button until the roof opens just a touch wider. Step 3. Enjoy your nice and level roof all over again! Love the car! I have a 2005 equinox and this recalibration did not work on my car, any suggestions?
When to open or shut the sunroof on a GM Truck?
DO NOT OPERATE THE SUNROOF GLASS IN THE OPEN/TILT DOWN DIRECTION UNTIL THE INITIALIZATION PROCEDURE IS COMPLETE OR SERIOUS DAMAGE MAY OCCUR. Using the close/tilt up portion of the sunroof switch, operate the sunroof glass until it reaches the full vent position.
Can You recalibrate the sunroof on a car?
I tried what the other thread said to do, and even though it is a different make it worked perfect. Open the sunroof to the vent position, release the button, and then push it in again for 5 – 10 seconds. The sunroof all of suddenly moved and recalibrated itself to the correct position. It now sits even with the roof and the leak is fixed.
The sunroof will only go to the vent position or only slide open. This concern can happen if the sunroof control module and sunroof motor are not timed correctly. To time the sunroof motor and control module, follow the instructions below. 1. Using the vehicle switches, move the sunroof glass panel as near to the closed position as possible. 2.
DO NOT OPERATE THE SUNROOF GLASS IN THE OPEN/TILT DOWN DIRECTION UNTIL THE INITIALIZATION PROCEDURE IS COMPLETE OR SERIOUS DAMAGE MAY OCCUR. Using the close/tilt up portion of the sunroof switch, operate the sunroof glass until it reaches the full vent position.
How do you close the sunroof on a car?
Press/slide forward on the switch again to make sure the sunroof is fully closed. To put the sunroof in the vent position, pull down on the front of the switch. Push up on the front of the switch to close it. Please follow this diagnostic or repair process thoroughly and complete each step.
How does the switch on the sunroof work?
If the sunroof module and motor were not timed correctly, the sunroof switch may operate the glass differently then it was designed to. This switch will slide forward and rearward, and this switch can also be pulled down or pushed up. Below is the instruction on how the sunroof switch operates.
What to do when your sunroof won’t open?
• Tilt the moon roof into the vent position as far as possible. Release the switch. • Press and hold the same switch again for 30 seconds until you see the moon roof move. • Release the switch and immediately press and hold it again. The moon roof will close, open fully and then close again.
What happens if you open the moon roof?
The moon roof will close, open fully and then close again. Do not release the switch before the moon roof has reached the closed position for the second time. If the system detects a malfunction, it enters a safety mode.
If the sunroof module and motor were not timed correctly, the sunroof switch may operate the glass differently then it was designed to. This switch will slide forward and rearward, and this switch can also be pulled down or pushed up. Below is the instruction on how the sunroof switch operates.
• Tilt the moon roof into the vent position as far as possible. Release the switch. • Press and hold the same switch again for 30 seconds until you see the moon roof move. • Release the switch and immediately press and hold it again. The moon roof will close, open fully and then close again.
How do you turn off the sunroof on a Honda Accord?
Turn the ignition to the RUN position. 2. Press the vent button on the power sunroof switch and hold until the sunroof glass panel has moved to the full vent position and the motor movement has stopped for at least 1 second. 3. Press the close switch on the power sunroof switch and hold for a moment (at least 100ms) and release.
How do you turn off the sunroof on a Dodge Ram?
This is from the service information. 1. Turn the ignition to the RUN position. 2. Press the vent button on the power sunroof switch and hold until the sunroof glass panel has moved to the full vent position and the motor movement has stopped for at least 1 second. 3.