Why does my trunk light not turn on?

Why does my trunk light not turn on?

The short story is that the trunk light is supplied +12v all the time through the red/white stripe wire. The Brown/white stripe wire is supposed to ground the trunk light through the switch on the trunk latch. The Brown/white stripe wire that went to the trunk switch was cut near the area where it runs by the drivers side hinge.

What does the trunk open warning light mean?

What the trunk open warning light means. Depending on the kind of car you have, the trunk open indicator may be tied in with the door open indicator lights or it may be separate. Either way, if this light is illuminated, you should double check that the trunk is fully closed. As soon as the trunk is secure, the light should go out.

Where is the wire for the trunk light?

The Brown/white stripe wire is supposed to ground the trunk light through the switch on the trunk latch. The Brown/white stripe wire that went to the trunk switch was cut near the area where it runs by the drivers side hinge. The brown/white wire is now reconnected… and the trunk light works…

Why is my trunk lock not working properly?

One of the major issues that can occur with this device is that the motor will work, but the locking mechanism does not. A locking mechanism has multiple components inside the actuator; one of which is a linkage system that manually moves the lock to the open position when the actuator is activated.

How to troubleshoot electrical wiring in a Toyota Camry?

When the circuit operation is understood, begin troubleshooting of the problem circuit to isolate the cause. Use Relay Location and Electrical Wiring Routing sections to find each part, junction block and wiring harness connectors, wiring harness and wiring harness connectors and ground points of each system circuit.

When does the warning light turn off on a Toyota?

If the front passenger’s seat is occupied, the front passenger’s seat belt also needs to be fastened to make the warning light (warning buzzer) turn off. The indicator light flashes after the ENGINE START STOP switch has been turned off to indicate that the system is operating.

What to do if you have a Toyota Camry engine problem?

The easy solution: if you own a Camry made between 1997 and 2001, check the oil frequently and add oil as needed. An engine rebuild is an option too, only that can be expensive.

What to do if the door ajar warning light stays on?

This can resolve mechanical issues, such as sticky latches and gummed-up switches. Spray the WD-40 liberally, and open and close each door firmly a dozen times, to work the lubricant into the mechanisms. Apply more WD-40 and repeat.