Why is my GMC Sierra not turning over?
First, the ignition switch sends electrical current from the battery to the starter solenoid. The solenoid then forces the gear in the starter housing to engage the engine. When the starter motor turns on and spins the gear, the engine roars to life. If any of these stop working, it means the starter won’t turn over in your GMC Sierra.
What should I do if my Sierra does not start?
Place the black lead of the multimeter on the negative battery terminal. If the battery reads less than 12 volts, charge it or replace it. If the battery reads higher than 12 volts, the battery is not the issue. If the Sierra does not start after replacing or charging the battery, move to the next step.
How does the starter work on a GMC Sierra?
The starter in your GMC Sierra is dependent on three pieces of equipment. First, the ignition switch sends electrical current from the battery to the starter solenoid. The solenoid then forces the gear in the starter housing to engage the engine. When the starter motor turns on and spins the gear, the engine roars to life.
Can you feel the gears on a GMC Sierra?
When you move the shifter can you feel the regular amount of resistance, can you feel the gears. If not the cable is broken or disconnected from the tranny. 94 people found this helpful. If the cable is good we need to check line flow/pressure.
How to test shift solenoids on GM 4.3L?
In this article, I’ll show you how to test the transmission shift solenoids (specifically 1-2 solenoid and 2-3 solenoid) on your GM 4.3L, 5.0L, 5.7L pick up, van, SUV. You’ll be surprised just how easy it is to diagnose these shift solenoids when they have failed.
When to know if you have a solenoid problem?
The most important thing to remember, when trying to decide if you have a solenoid issue or internal transmission damage (causing the transmission to stay in Limp-In mode) is two very important things: You’ll have a specific transmission solenoid trouble code stored in the PCM’s memory.
Why is my GMC Sierra not shifting past 2nd?
No change then changed transmission. Still same thing that black plastic box on the side was cracked I just changed it still nothing. One fella said maybe change get out that cluster that plugs into the box. I’m at end of my rope. It’s Christmas and im getting really bummed where is there a fuse or relay if anybody can help please. Kathy in tx
What’s the problem with my GMC Sierra 1500?
Hi everyone I’m having the same problem I have a 1997 Chevy Tahoe LT 5.7 Vortec V8 2WD it’s stays in first gear and it don’t go into reverse but the lights go on when you put in reverse and no Check Engine light on anybody know what it could be the problem Hey! I have a 94 GMC suburban. Trans was leaking so I put in some stop leak.
Why does my GM car say no start no crank?
How to diagnose a no start no click on GM vehicle. If you have a late model GM vehicle and turn the key only to hear nothing, you’ll most likely think you have a dead battery—and you may. But a no start, no crank, no click condition can be far more involved than that.
How to troubleshoot a no start GM 4.3L pick up?
Testing a Cranks but Does Not Start condition on your GM 4.3L, 5.0L, 5.7L pick up, van or SUV is not that hard to do, if you have a solid diagnostic strategy. In this article I’ll show you the basics of testing such a problem.
Why does my GMC interior lights not turn off?
It will be in that area and is a button with a lamp or beam on it. Yeah that is the override button to shut the dome lights off when you have the tailgate or doors open for any length of time. A door sensor can be stuck also thinking a door is open.
When do the courtesy lights turn off on a GMC?
When the driver uses the remote function actuator transmitter to lock the doors, the BCM will keep the courtesy lamps on approximately 2 seconds . If the ignition switch is turned to either the RUN or CRANK position the courtesy lamps will turn off immediately.
How to diagnose a no start no click on GM vehicle. If you have a late model GM vehicle and turn the key only to hear nothing, you’ll most likely think you have a dead battery—and you may. But a no start, no crank, no click condition can be far more involved than that.
What to do if your truck won’t start?
Problem: the truck won’t start, does nothing when the key it turned, no interior lights come on, no dash lights come on, the headlights don’t work, the hood light doesn’t work… its all dead.
When do you Know Your GMC Sierra ignition switch is bad?
If your GMC Sierra is starting right up, but then immediately dies, that is a very good indication that the ignition switch is bad. Here’s what happens. You aren’t getting power to the ignition or fuel pump while the key “rests” in the run position.
Can a GMC Sierra shift into any gear?
Answer: There is no solenoid that will prevent the transmission from going into any forward gear. Shift solenoids control shift 1-2, 2-3, 3-4 and downshifts. You need to get a scan done on the computer to see what code (s) is set.
Why is the ignition switch on my GMC Sierra not working?
The ignition switch is responsible for sending power to the accessories. So, if you find yourself in a situation where your Sierra runs, but nothing else in it works, it may be a bad ignition system causing your problems.
When did the GMC Sierra truck come out?
The GMC Sierra is the fifth-most popular truck in the United States, with more than 230,000 trucks sold in 2019. General Motors introduced the GMC Sierra and its twin, the Chevrolet Silverado, in 1998.
Answer: There is no solenoid that will prevent the transmission from going into any forward gear. Shift solenoids control shift 1-2, 2-3, 3-4 and downshifts. You need to get a scan done on the computer to see what code (s) is set.
What kind of engine is a 2000 GMC Sierra?
2000 GMC 1500 2wd truck. Engine Size : 4.3 lt Question: transmission will not shift into drive and overdrive checked fluid OK i think a shift solenoid tranny is a 4L60-E tell me what else to check there is a check engine lite on do not code for transmission valve or shift solenoid answer my question please.