Can a Toyota Prius start with a new battery?
Yes, with the new battery in we tried to jump start but no response. No lights, no noise no anything,. No sorry don’t know what that is…I took the new battery to Kragen Auto Parts to be tested, they said it is charged.
What to do if your Prius wont start?
No lights, no noise no anything,. No sorry don’t know what that is…I took the new battery to Kragen Auto Parts to be tested, they said it is charged. What we need to do is check at the jump start attachment under the hood for power. To do this will require a voltmeter or a 12 volt test light.
Why does my 2004 Prius keep losing power?
Another frequent occurrence with the 2004 Prius is that it will suddenly lose power while it is moving, and all of the warning lights on the dashboard will illuminate, including the Check Engine light. This is due to the system triggering a “fail-safe” mode that shuts off the gas engine. Step 1: Pull off to the side of the road.
Why was there a recall on the Toyota Prius?
Nobody wants their car to suddenly stop working. Unfortunately, Toyota recalled around 75,000 of their 2004 Prius cars because of some technical issues that were causing them to stall. This could be caused by several different failures in the car’s system.
What to do if your Toyota Prius won’t start?
Start the car normally after the system has rebooted by pushing down on the brake and pressing the Start button again. Tip: If you try to restart your Prius and the dashboard lights come on but they are dim and blinking, you may have a problem with your 12V battery.
How to re-start your second generation Prius?
Step 1: Press and hold the “Start” button. Hold the Start button down with your index finger for at least 45 seconds. Hold the Start button down with your index finger for at least 45 seconds. Step 2: Restart the car .
What’s the best way to start a Prius?
Step 2: Connect the positive jumper cable to your battery. Connect the positive (red or orange) cable to the battery of the stalled Prius. Leave the negative (black) cable clamped on a piece of metal or on the ground. Step 3: Connect the second pair of jumper cables. Attach the other positive and negative cables to a car with a working battery.