Do you need an aftermarket car stereo system?
If you are sensitive to audio quality when listening to music, you might choose to install an aftermarket car stereo. If you have experience in wiring, you should have no trouble in putting a new stereo in your car. Here are a few tips on how to install a new car stereo system.
Where do you plug in an aftermarket stereo?
The wires on the harness adapter and plug are usually color coded or tagged for easy identification and matching. Connect the aftermarket stereo. Now that the wiring harness adapter is plugged into the wiring harness and attached to the stereo plug, all you need to do is plug it into the back of your stereo.
Where is Stero in Petaluma, CA located?
1758 Corporate Circle Petaluma, CA 94954 Phone: 800-762-7600 Fax: 707-762-5036 News & Events August 26th – 28th Orlando, Florida.
If you are sensitive to audio quality when listening to music, you might choose to install an aftermarket car stereo. If you have experience in wiring, you should have no trouble in putting a new stereo in your car. Here are a few tips on how to install a new car stereo system.
The wires on the harness adapter and plug are usually color coded or tagged for easy identification and matching. Connect the aftermarket stereo. Now that the wiring harness adapter is plugged into the wiring harness and attached to the stereo plug, all you need to do is plug it into the back of your stereo.
Do you have to cut the wiring for a car stereo?
This procedure will vary from car to car. Unplug the factory wiring harness from the back of the stereo. If you opted out of buying a wiring harness adapter, you may have to cut the wires instead of just pulling them out. Some vehicle manufacturers may void warranties if wiring is cut. Cut only as a last resort.
What kind of adapter do I need for aftermarket radio?
The aftermarket wiring harness adapter is specifically designed to fit your vehicle’s wiring harness. This allows you to simply plug the new harness adapter into the factory radio harness and makes wiring your stereo fairly straightforward. Connect the new radio’s plug to the wiring harness adapter.
Can a double DIN stereo be replaced in an aftermarket car?
OEM Replacement: Some cars inconveniently do not allow a single or double DIN system to replace the OEM system and need an aftermarket stereo that is designed in a size to accommodate your car’s dash like the OEM stereo. These stereos are called OEM replacements. Sound systems that have Bluetooth are made for hands-free use.
This procedure will vary from car to car. Unplug the factory wiring harness from the back of the stereo. If you opted out of buying a wiring harness adapter, you may have to cut the wires instead of just pulling them out. Some vehicle manufacturers may void warranties if wiring is cut. Cut only as a last resort.
OEM Replacement: Some cars inconveniently do not allow a single or double DIN system to replace the OEM system and need an aftermarket stereo that is designed in a size to accommodate your car’s dash like the OEM stereo. These stereos are called OEM replacements. Sound systems that have Bluetooth are made for hands-free use.
Where do you plug in a car stereo?
Plug the wiring harness into the back of your stereo. Your old stereo should only have one wire left and you can now take that and plug it into your new stereo. This should be your antenna. Slide your stereo into the spot in the dash. Before you secure it, test it to be sure it works.
Is it better to get a new car audio system?
These tone and volume changes are a good indicator of weak or damaged car audio systems, so it’s better to get a replacement. Even if the sound quality doesn’t seem weak, it doesn’t mean you can’t get a better system. Your factory car stereo probably isn’t as good as you think it is.
How much does it cost to install a stereo?
On average, car stereo installation, without the car stereo, is going to range anywhere from $0 if you purchase directly from a company during a promotion to as much as $300 for an advanced receiver that may require more wiring than usual. Most basic installs, however, will be about $40 to $80.
What is the best aftermarket car stereo?
The Pioneer DEH-80PRS is the best single-din stereo we reviewed because it has great audio quality and is easy to use. Plus, its three 5-volt pre-outs make it ideal for expansion.
How much to install a car stereo?
Some people often install new speakers with their car stereo. To install car speakers, the costs can be in the $70 to $180 range for the installation job only, but sometimes, the company may cut you a deal if you have the job done all at once.
What do I need to install a car stereo?
- Match up the wires. Match the wires of the car’s harnesses to the new stereo’s harnesses.
- assemble it according to the stereo’s instructions (it will often mean fitting a metal housing
- Connect the power source.
- Ground the stereo.
- Connect the remaining wires.