Does a 2008 Honda Accord have struts or shocks?
The suspension system of your vehicle is vital for driving safety and ride quality. It’s a complex system consisting of dozens of components such as springs, shock absorbers, struts, control arms, sway bars, steering links, and other… Honda Accord 2008, Strut-Plus™ Twin-Tube Complete Strut Assembly by KYB®.
How do you replace the front suspension on a Honda Accord?
Using a combination of a hex socket and pass through ratchet wrench or box wrench, remove the strut shaft nut on top of the strut mount. Pull the old strut away from the spring, transfer components to the new strut and move the new strut shaft through the spring and into the strut mount hole. Thread on and tighten the strut shaft nut.
Where do you put the shocks on a Honda Accord?
Put the assembled shock back in the wheel well, and loosely fasten the the two 14mm bolts from inside the trunk. Have a friend step on the drum brakes, while you place the shock’s lower fork onto the lower control arm.
How do you remove a strut from a spring?
Remove the large nut on top of the strut with ratchet and socket combination, and hold the strut rod with a wrench just below the strut bearing. Make a note of the strut top plate rotation before removal and reinstall in the same position. The strut can now be removed from the spring while the spring is still compressed by the spring compressor.
How do you install a new strut on a car?
Installing a New Strut Install the completed strut assembly back into the steering knuckle. Replace the bolts, leaving them finger tight, allowing the assembly to move freely. Place the strut assembly back into the strut tower and replace the strut tower bolts.
Using a combination of a hex socket and pass through ratchet wrench or box wrench, remove the strut shaft nut on top of the strut mount. Pull the old strut away from the spring, transfer components to the new strut and move the new strut shaft through the spring and into the strut mount hole. Thread on and tighten the strut shaft nut.
Is there a quick way to replace struts?
They get worn out with use and sometimes will break if you’ve gone over some particularly bumpy terrain, resulting in a kind of deep click sound when you turn. Purchasing a quick-strut assembly is the quickest and easiest way to replace the struts yourself. Below, you can learn to remove the old strut and replace a new assembly.
What happens to your tires when your struts wear out?
Tires: the struts are a major part of overall front end suspension alignment. When they wear out, the suspension will sag, causing the front tires to absorb more heat on the inner or outer portion of the tire.
Why does my car have a bad strut assembly?
Typically this is an indication of front end alignment that is faulty, however the issue is typically caused by a strut assembly that has worn out. If you take your vehicle to the local ASE certified mechanic to have the front end alignment checked, the majority of the time a broken strut will be the cause.