How do I close my Beetle convertible top?
To CLOSE, pull and hold the convertible top button in the roof console until the windows and top are completely closed. A chime will sound while the top and windows open. Be sure to hold the button until the chime goes off. Briefly press or pull the switch as far as it goes.
How do you clean a VW Beetle convertible top?
Washing the top of your convertible Once your convertible top is cooled down, thoroughly wet it with cool water. Then, spray a light coat of specialty cleaner on the top. Spread the cleaner evenly across the top using a sponge or soft brush. Using the soft brush, then gently scrub out dirt.
Can I use dawn on my convertible top?
A soft brush and some water like was suggested will usually get most dirt/dust off. if you need a little extra use just a drop or two of liquid dish soap or car wash soap. Just use sparingly, and only on the top if using dish soap. As it will strip the wax off your paint.
What do you need to replace a beetle top?
The replacement of a Beetle or Super Beetle convertible top. usually requires some of the following: wood top bows, padding under the top, hold down cables, the rear window frame or parts for it, etc.
Is there a convertible top package for a VW Beetle?
This convertible top restoration package contains all of the parts (besides the wood bows) that should be “on hand” for a complete top restoration (until the end of the job when the rear window is installed.) We urge you to look at or convertible top rear window restoration tip on this page.
Do you need bows for a Beetle convertible?
Your Beetle convertible wood top bows should be evaluated after the old convertible top is removed from the top frame. Other parts that may be needed such as rubber wedges, hinge covers, bow cover plates, etc. can be obtained after the TOPPAK convertible package parts are installed.
What is the volkwwagen convertible top restoration package?
In Cart! The 24 page Volkwwagen convertible top and headliner installation booklet. This convertible top restoration package contains all of the parts (besides the wood bows) that should be “on hand” for a complete top restoration (until the end of the job when the rear window is installed.)