How do you change the seat on a GMC Denali?
Enter the Settings menu within the GMC Infotainment screen. Select the “Vehicle” button, then either the “Seating Position” or “Comfort and Convenience” button, depending on the vehicle. From there, select “Seat Entry Memory, and select “On” or “Off” to enable or disable the feature.
How do you remove a third row seat?
Should you need to remove the third-row seat, it is possible with some muscle and a few tools. Locate the three seat frame trim covers at the front of the third row seat. They cover the three front-seat mounting bolts that you need to remove. Gently pry up on them to release the two clips on each trim piece.
How can I get my GMC memory seat to work?
Start the vehicle with a different key or RKE transmitter. The DIC should display the driver number; 1 or 2. Turn the ignition off and remove the key or RKE transmitter from the vehicle. Start the vehicle with the initial key or RKE transmitter. The DIC should display the other driver number not shown in Step 1.
How do you take a seat out of a car?
Press the locking tab with your small flat screwdriver and pull firmly to release the connector. Using your helper, lift the seat out of the vehicle. Support it well, as it will come out as a bench assembly. Be careful not to scratch the interior panels with the bare metal seat mounts.
Is there a third row seat in a GMC Yukon XL?
The GMC Yukon XL is equipped with a third row of seating. It is a 60-40 split bench seat, configurable for folding down to carry extra cargo or for set-up to carry extra passengers. Should you need to remove the third-row seat, it is possible with some muscle and a few tools.
How to remove the seats from a GMC Truck?
Click to expand… Click to expand… Click to expand… Click to expand… Save yourself the time and aggravation and simply get the inverted torx socket set. I tried to use regular 6-pt sockets to take my old seats out and it just wasn’t going to happen.
How to remove the second row of captain’s chairs in a GMC Yukon XL?
Removing the second row of Captain’s chairs in a GMC Yukon XL is necessary to make additional room inside the sport utility vehicle. The Captain’s chairs are held in place by bolts in the floorboard. Lifting the seats out of the truck may be challenging because they are bulky and heavy. Open the side door for easy access to the bottom of the seat.
How do you remove a second row seat from a Chevy pick up?
Squeeze the tabs together on the electrical connector and separate. Pull the seat out of the truck. Some assistance may be required. Repeat to remove the other seat on the second row. “Chevrolet and GMC Pick-ups Haynes Repair Manual for 2007 thru 2010.
How do you remove a captain’s chair from a truck?
They will be located at each corner. Unscrew the four bolts with a socket wrench. Place the bolts in a safe place for later use. Tilt the seat forward to disconnect the wiring. Squeeze the tabs together on the electrical connector and separate. Pull the seat out of the truck. Some assistance may be required.