How do you install an ignition lock on a Pontiac Sunfire?

How do you install an ignition lock on a Pontiac Sunfire?

1. Turn the steering wheel so that the vehicle’s wheels are pointing straight ahead. 2. Turn the ignition switch to the OFF position. 3. Remove the key from the ignition switch. 4. Remove the left Instrument Panel (IP) end cap.

How do you disabling Sir on a Pontiac Sunfire?

Disabling the SIR System. 1. Turn the steering wheel so that the vehicle’s wheels are pointing straight ahead. 2. Turn the ignition switch to the OFF position. 3. Remove the key from the ignition switch.

What to do if your car key won’t turn in?

Ignitions can be extremely fragile. Please do not poke around inside the ignition lock cylinder. A dirty ignition can be fixed by spraying small doses of an electrical cleaner in the ignition then gently sliding the key in and out of the ignition cylinder many times.

Why does my Saturn key not turn in?

The Saturn ignitions tend to stop turning because of worn keys and worn ignitions. (mostly worn ignitions) Vehicles Affected The GM (Buick, Cadillac, Chevy, GMC, Hummer, Oldsmobile, Pontiac) ignitions tend to fail because of wear from inserting the key at a slight angle.

1. Turn the steering wheel so that the vehicle’s wheels are pointing straight ahead. 2. Turn the ignition switch to the OFF position. 3. Remove the key from the ignition switch. 4. Remove the left Instrument Panel (IP) end cap.

Disabling the SIR System. 1. Turn the steering wheel so that the vehicle’s wheels are pointing straight ahead. 2. Turn the ignition switch to the OFF position. 3. Remove the key from the ignition switch.

What are the three wires in a GM ignition switch?

In GM cars, there is a bundle of three wires which go from the Body Control Module to the Ignition Switch. They are Black (analog return), White (power), and Yellow (analog data).

What’s the best way to change an ignition switch?

Reconnect the cable to the negative (-) terminal on the battery, then insert the key into the ignition and turn it to start the vehicle. The vehicle should start without any issue.

What to do if your key is stuck in the ignition switch?

The key may be stuck in the ignition switch, but that shouldn’t stop you from turning it. If you don’t have a key, you will need to force the module to turn using a flathead screwdriver. Press the release pin inside the hole on the ignition module with a screwdriver.

Reconnect the cable to the negative (-) terminal on the battery, then insert the key into the ignition and turn it to start the vehicle. The vehicle should start without any issue.

The key may be stuck in the ignition switch, but that shouldn’t stop you from turning it. If you don’t have a key, you will need to force the module to turn using a flathead screwdriver. Press the release pin inside the hole on the ignition module with a screwdriver.

What causes a locked steering wheel to not turn in?

If a locked steering wheel is the only thing preventing your key from turning the ignition, then follow our instructions below for How to Unlock a Locked Steering wheel and you will be back on the road fast. Problem 2. Dirt, pocket lint or debris (like tape from opening a package) may cause your key not to turn in your ignition lock cylinder.

When did the Pontiac Sunfire model come out?

The Pontiac Sunfire was introduced in 1995. This model has two types of keys. Non-Transponder Keys: 1995 to 2005. Please keep in mind that while some keys or keys may look the same, they have different capabilities/frequencies/keyways. Therefore, having the right key is essential.

Is there a VIN code for a Pontiac Sunfire?

The VIN allows the dealer or automotive locksmith to access the key code on file, i.e., to cut you a replacement key by code, which is a very fast and easy process. There are, however, two things to consider: For Pontiac Sunfire vehicles that are older than ten years, there are no codes available.

Where is the ignition lock on a 1999 Pontiac Sunfire?

Turn the ignition lock cylinder (1) to the RUN position. 5. Push the locking button (2) on the rear of the housing assembly (1). 6. Remove the ignition lock cylinder by pulling outward from the steering column. 7. Disconnect the electrical connector (3) from the ignition lock cylinder (1). 1.

The Pontiac Sunfire was introduced in 1995. This model has two types of keys. Non-Transponder Keys: 1995 to 2005. Please keep in mind that while some keys or keys may look the same, they have different capabilities/frequencies/keyways. Therefore, having the right key is essential.

The VIN allows the dealer or automotive locksmith to access the key code on file, i.e., to cut you a replacement key by code, which is a very fast and easy process. There are, however, two things to consider: For Pontiac Sunfire vehicles that are older than ten years, there are no codes available.

Why does my car key not turn in?

Problem 2. Dirt, pocket lint or debris (like tape from opening a package) may cause your key not to turn in your ignition lock cylinder. Ignitions can be extremely fragile. Please do not poke around inside the ignition lock cylinder.

The Saturn ignitions tend to stop turning because of worn keys and worn ignitions. (mostly worn ignitions) Vehicles Affected The GM (Buick, Cadillac, Chevy, GMC, Hummer, Oldsmobile, Pontiac) ignitions tend to fail because of wear from inserting the key at a slight angle.