How to clear the alarm code on Thermo King Apu?
Cycling the HMI Control Panel Main Power off and back on will clear the alarm code. First, record the alarm code shown in the display. Use the HMI Control Panel Main Power On/Off key to turn the TriPac unit off. Resolve the
What is the alarm code for a Thermo King truck?
Thermo King Alarm Codes – North America. This is a listing of all current truck, trailer, CR, DAS and DSR alarm codes. On multi-temp units, the zone will be identified. Please record all alarms that occur to assist technician in resolving issue. Alarm codes with parenthesis (XX) may exist with alarm code 84 and may clear automatically.
What does an alt code on an APU mean?
(In my own words your APU needs Freon) ALt: This code indicates that a charging system failure has occurred. This code will occur if there is no alternator output after 2 minutes of operation. To clear Alarm Codes, use the HMI Main Power Key to turn off the TriPac system.
When to turn off the TriPac Apu alarm?
This code will occur if there is no alternator output after 2 minutes of operation. To clear Alarm Codes, use the HMI Main Power Key to turn off the TriPac system. This is straight from the Manual and these are ALL the codes (except the “In my own words” part). A lot of people are trying to find these codes so here they are!
What to do when your Thermo King alarm goes off?
Press the check button and the on button at the same time. Release the check button and the on button, then press the equal sign button. Wait for a few seconds. The red diamond warning should be gone by this time, which indicates the unit has reset. Here’s a list of frequent Thermo King alarm codes or APU fault codes that may get you into trouble.
What does the Thermo King TriPac Apu do?
TriPac Unit Description The Thermo King TriPac EVOLUTION APU (Auxiliary Power Unit) provides auxiliary heating, cooling temperature management that allows drivers to reduce unnecessary truck engine idling, conserve diesel fuel and save money. TriPac EVOLUTION provides truck engine preheating, battery
Why is my reset button on my Apu not working?
being placed in the OFF position or if a DPF shutdown alarm occurs. The Reset Switch has tripped. This may be caused by low engine oil pressure, high engine coolant temperature, or an engine start failure. Be sure the DPF Regeneration Switch is in the ON position. If any DPF alarm codes are set, correct the problem and clear the alarm.