How to remove plastic panel from Ford Fiesta?
Pop in the plastic screw cover behind the door opener handle. Line up the clips on the back of the door pull handle and push it back in to place. Sit inside the vehicle, close the door and verify that the door opener handle, power door lock switch and power window switch all still work properly.
How to remove door trim on Ford Fiesta?
Open the door wide and undo the plug joining the door to the car, and push it through the door, then undo the clip holding this loom to the metal of the door inner. To undo the loom from the door lock, you need to pull the red clip up, then just yank it off. Then lift away the panel. Done. I then wiped down the inside, added the Silent Coat.
How do you remove a door cover on a Ford?
Pry the cover off with a small flat-bladed screwdriver. Remove the one to two (depending on the year) retaining screws underneath the cover. Remove the retaining screw located in the door handle molding. Pry the molding out from the door from the rear of the molding using the trim tool.
How do you remove the door panels on a Ford Focus?
How to Remove Door Panels of a Ford Focus Look for a small hole in the door-pull handle cover. Insert a small screw driver into the hole to pry the cover off. Remove the two screws behind the cover. Pull the door latch handle and remove the screw that is behind it.
Pop in the plastic screw cover behind the door opener handle. Line up the clips on the back of the door pull handle and push it back in to place. Sit inside the vehicle, close the door and verify that the door opener handle, power door lock switch and power window switch all still work properly.
How do you remove a plastic door panel?
There are two screws on the outer edge of the door panel hidden behind plastic caps. Pry out the plastic screw covers with a small flathead screwdriver. Remove the two screws on the outer edge of the door panel by turning them counterclockwise with a Torx T20 star bit screwdriver. Set the two screws aside in a safe place.
Where is the OEM speaker on a Ford Fiesta?
The OEM door speaker is located the bottom inner corner of the door frame. Press in the release tab on the white plastic electrical connector before sliding the plug straight out of its socket. Remove the three Torx T-25 star bit screws holding the speaker in place by turning them counterclockwise.
How do you remove a Torx door handle?
Set the two screws aside in a safe place. Then move to the top of the door pull handle and remove the Torx T25 screw by turning it counterclockwise. Remove the other T25 screw at the bottom of the door pull handle near the armrest by turning it counterclockwise. Set the two door pull handle screws aside in a safe place.