What happens when a blower motor resistor fails?

The blower motor resistor is the component directly responsible for controlling the blower motor fan speed. If the resistor shorts or fails, it may cause the blower motor to remain stuck on one fan speed.

What are the symptoms of a bad heater motor resistor?

Symptoms of a Bad or Failing Heater Blower Motor Resistor. 1 1. Blower motor stuck on one speed. A common symptom of a faulty blower motor resistor is a blower motor that is stuck on one setting. The blower 2 2. Blower motor does not work on certain settings. 3 3. No air from the vehicle’s vents.

What does the resistor on a heater do?

It is responsible for controlling the blower motor’s fan speed. When fan speed is changed via the knob on the instrument cluster, the blower motor resistor changes setting, which changes the speed of the blower motor.

Why is my blower motor stuck on one speed?

Blower motor stuck on one speed A common symptom of a faulty blower motor resistor is a blower motor that is stuck on one setting. The blower motor resistor is the component directly responsible for controlling the blower motor fan speed. If the resistor shorts or fails, it may cause the blower motor to remain stuck on one fan speed.

What to do if your cooling fan resistor is bad?

For this reason, if you suspect that your cooling fan resistor may be having an issue, have the vehicle inspected by a professional technician, such as one from YourMechanic, to determine if your car needs a cooling fan resistor replacement. The most popular service booked by readers of this article is Vehicle Engine Cooling Inspection.

Can a blower fan only work on high speed?

Blower Motor Fan Only Works On High Speed? Plus – Tips To Prevent Repeat Failures! If playback doesn’t begin shortly, try restarting your device. Diagnostic training videos and content hosted by ASE Master and L1 Certified Technicians.

What happens if you have a bad blower motor resistor?

If you have faulty blower motor resistor you may experience low airflow coming from the vents even when the fan is all the way on high. In some cases bad blower motor resistor may not even turn the blower motor fan as a result your fan will not work at all and there will be no air coming from the vents.

What are the symptoms of a bad cooling fan resistor?

Another symptom of a potential problem with the cooling fan resistor is cooling fans that stay on at all times. If the resistor shorts or fails, it can cause the cooling fans to stay on even when they are not supposed to.

Why does my blower motor only work at slow speed?

Blower motor only working on low speed. Another common symptom of a faulty blower motor resistor is that the blower motor only works at slow-speed. This can be caused because of bad wiring between the blower motor resistor and the blower motor itself.

If you’ve replaced a blower motor resistor and that replacement has failed, it’s time to conduct an amperage test on the blower motor. If the amp draw exceeds manufacturer’s specifications, replace the blower motor. can also cause an overheating condition. In some cases, the heat is so high that it melts the connector.

Where is the blower control switch on the dashboard?

The blower control switch on the dashboard controls the circuit flow of the blower motor to adjust the voltage from low, to medium, to medium-high, to high. When on high, the circuit bypasses the blower resistor.

When do you need to replace the blower motor relay?

If the blower motor does not function, car fuses are blown, or relays are melting, you may have to replace the car blower motor relay. 1. Blower motor does not function 2. Blown fuses 3. Melted relay The blower motor relay is the electrical switch that is used to supply the power for the vehicle’s blower motor.

Where does the power go in a blower motor?

For each higher speed, power flows through one less resistor. Some car makers run blower motor power through the fan speed switch first, then through the blower motor resistor and then to the blower motor and ground. Other car makers reverse that and run power to the blower motor first and terminate ground at the blower fan speed switch.

What happens when you replace a blower motor resistor?

In this case, the heater and air conditioning system may still function normally pushing the cold or hot air out of the vent beside the speed. The resistor needs to be replaced with a new one in order to restore its function. Another common symptom of a faulty blower motor resistor is that the blower motor only works at slow-speed.

What does it mean if your blower motor is not working?

Average rating from 849 customers who received a AC is not working Inspection. The blower motor resistor is an electrical component that is a part of the vehicle’s heating and air conditioning system. It is responsible for controlling the blower motor’s fan speed.

How is the speed of the blower motor controlled?

The electronic module that controls the speed of the blower motor is called a blower motor control module. In some cars, the blower motor has only 4 or 5 fixed speeds. In this case, the speed of the blower motor is controlled by a blower motor resistor.

What to do if your blower fan is not working?

Blower Motor Resistor Replacement – YouTube Blower fan not working – 2004-2014 Ford F-150 and other models. Blower Motor Resistor Replacement If playback doesn’t begin shortly, try restarting your device.

How does a blower motor resistor control the fan speed?

The blower motor resistor controls the fan speed of the blower motor and the resulting change in air pressure produced by the movement of the blower fan. It accomplishes this by regulating the electric current that powers the motor.

Why is the resistor not working on my blower?

Hi There, The resistor is what controls the speed of the blower motor, not the relay. The blower motor relay supplies power to this motor when you turn the switch to “on” that can sometimes fail. When this happens, you may notice that you will not feel anything blowing out of the vents at all.

What happens when a heater motor resistor fails?

If the resistor shorts or fails, it may cause the blower motor to remain stuck on one fan speed. The heating and air conditioning systems may still function at one speed, however the resistor will have to be replaced in order for full functionality to be restored. 2. Blower motor does not work on certain settings

What causes a blower fan to not work?

When this happens, you may notice that you will not feel anything blowing out of the vents at all. This may also cause the blower motor to work intermittently. A blower fan is connected to the negative battery terminal (also called ground) on one end and to the positive battery terminal through a blower motor resistor on the other end.

What causes a heater resistor to fail in the glove box?

It’s worth checking the drain holes for the channel at the base of the windscreen are not blocked. They can get blocked quite easily and then you get water ingress to the back of the glove box area where the motor and resistor pack is mounted. Which eventually causes corrosion of bearings and connections leading to failure.

How is the power of a resistor related to temperature?

The power dissipated in a resistor is proportional to the square of the current through it (or equivalently the voltage across it). i.e. if the motor is drawing double the current, the resistor will be dissipating four times the power, and with lower airflow it’s temperature rise would increase by even more.

How much does it cost to replace a blower motor resistor?

The blower motor resistor or control module replacement is not very expensive. For example, one of our colleagues had a problem with his 2011 Ford Escape: the fan only worked at the speed 4. He paid $50 to diagnose and $112 to replace the resistor at a local Ford dealership.

Why does my Dakota blower resistor keep going bad?

When your Dakota or Durango left the factory, it had a Mopar motor and voltage resister that were compatible with each other. After 10-15 years the motor wears out , begins to draws more amps burns up the resister. Most people replace the wiring harness and the resister with. cheap replacement from Autozone / Advanced etc.

Why does blower motor resistor keep going out?

The blower motor appears to be defective here. When the brushes wear out the motor draws excessive amps which could cause the resistor to burn out. Before making further replacements remove the motor and check it, especially the brush assembly. This is the most likely reason for the resistor to fail repetitively.

How much does a blower motor cost?

Based on these factors, the costs, including both parts and labor, can range anywhere from $250 to more than $500 for a standard single speed blower motor. If a blower motor is required for a more expensive unit, such as a variable-speed motor, then the costs could be more than $1,000; however, these motors tend to be relatively rare.

Where is the resistor for the blower motor located?

Two individual resistors make up the blower motor resistor assembly on your Chevy pickup. As you’re probably already aware, these resistors are located between the A/C-Heater control panel and the blower motor . The purpose of these resistors is to reduce the amount of the blower motor’s current that’s passing through them.

Where is the blower motor?

A blower motor can typically be found in the heater box , although every vehicle is configured a little differently. Some blower motors are easy to access, and others are buried under the dash.

When do you replace the fan control AMP?

If that checks out replace the blower motor. If you don’t see a change in voltage on terminal 2 of the blower motor when adjusting the fan control knob than check for power on terminal 2 of the fan control amp and for ground on terminal 1. If you have power and ground replace the fan control amp.

What are the symptoms of a worn out blower motor?

One of the symptoms of a worn out blower motor is that it can intermittently produce a loud screeching noise when running. How to test a blower motor? If the blower motor doesn’t work at all, the blower motor itself must be tested first. Typically it’s done by measuring the voltage at the blower motor connector when it’s turned on.

If any of these resistances show an open circuit, then the blower resistor desires to get replaced. Know what fee you should pay to get your automobile constant. The average cost for a blower motor resistor substitute is between $80 and $150. Labour costs are envisioned among $35 and $80 even as elements are priced between $50 and $75.

Why does my AC blower motor work intermittently?

Intermittent electrical problems can make you feel like your a blind man trying to catch a stray dog. You can’t post conmments that contain an email address.

What to do if your blower resistor Burns?

Look for obvious signs of corrosion and burns from overheating. If you see signs of overheated connectors, replace the blower resistor and its connector, but again, you must splice the wires right, or you’ll have problems at the splice later on.

Is there a fuse for the blower motor?

The blower motor is powered by a fuse-like device called a relay. If your heater or air conditioner does not blow air through the vents, this could indicate that the blower motor fuse has probably blown. While replacement is easy, the exact location of your blower motor fuse may vary from vehicle to vehicle. Step 1

Could You Tell Me the location of the blower motor resistor?

Find the blower resistor and detach it from the rest of the circuit. For the precise location, consult the repair manual for your car’s make and model. Some common locations are near the blower fan motor, under or behind the dashboard, around the passenger footwell etc.

What causes fan resistor failure?

In most cases, a blower motor resistor fails due to corrosion or overheating. Sometimes, the mechanical resistance to the motor rotation causes an excessive electric current that can overheat and prematurely damage the blower motor resistor.

What to do if your Toyota Fan stops working?

A lick with the heel of my hand brought the blower motor back to life for a couple of days, I thumped it again and it worked for a day, but I noticed that it is dragging a bit, not blowing with the force it used to. I scored a Toyota factory motor on CL for $50, and it is on the way.

When did the blower on my Toyota stop working?

Pirates here at the dealership wanted $169.0 😆 Yeah NOT. Blower stopped working last Thursday, It came back on Friday after I wiggled the blower motor resistor, went back out Saturday. It doesn’t work on any speed.

What to do if your Tacoma blower stops working?

Easy thing to do is unplug the Blower motor and check for power and ground when the switch is on. If so you need a motor (which is probably the problem). No need to check fuses and such if you have power at the motor (with switch on ofcourse) ’06 Tacoma Double Cab 4×4, Auto , TRD-Off Road, Silver. BHL mod and removed emblems

What should I do if my blower motor stops?

Replace blower motor. If you have a variable speed blower motor, replace the blower motor speed control module. If you have a three or four speed blower motor, remove the blower motor relay. If the motor stops, replace the relay. Alldatadiy.com and Eautorepair.net are professional-grade shop manuals—period.

How is a step resistor used in a fan?

A voltmeter connected to both ends of a resistor while current is passing through it to a load will measure the amount of voltage being “dropped” by the resistor. Because lower voltage means lower current delivered to the fan, the stepped resistor circuit can be used to control fan speed.

Navigation