What is a fi light?
The FI indicator light (LED) emits service code(s) to show. the problem(s) which the DFI system and ignition system. has at the moment of diagnosis.
What does FI mean on my motorcycle?
Motorcycle Fuel Injection (Fi) System Explained.
What is FL light on motorcycle?
Yes, the FI light is related to the Fuel Injection system. It will light up if there are any problems with the system. and a damaged throttle body. It is a warning light that should be checked out and not simply ignored if it stays on.
What does F1 on a GSXR 600 mean?
It means you have a problem with the fuel injection system if you can start the bike then take it to a Suzuki mechanic. If the F1 is full on i.e.not flashing then the bike will not start normally.
What is the Mil code on a Honda CBR 600 F4i?
All owners of the Honda CBR 600 F4i will sooner or later have to deal with such a problem as the flashing of the FI (MIL) light. These short and not much longer blinks are the same error codes.
How to check Honda CBR 600 f4i-kappa motorbike?
• Hard start at a low temperature (simulate using numerical values; 90″C/194T) • Poor engine response when operating the throttle quickly (simulate using numerical values; Throttle opens 0″) Turn the ignition switch to “OFF”. Disconnect the MAP sensor 3P connector. Check for loose or poor contact on the MAP sor connector.
What does PGM-FI Mil stand for on Honda CBR 600?
• The PGM-FI MIL denotes the failure codes (the number of blinks from 0 to 33). When the indicator lights for 1.3 seconds it is equivalent to 10 blinks For example, a 1.3 second illumination and two blinks (0.5 second X 2) of the indicator equals 12 blinks.
When to use code 12 on Honda CBR 600?
When the indicator lights for 1.3 seconds it is equivalent to 10 blinks For example, a 1.3 second illumination and two blinks (0.5 second X 2) of the indicator equals 12 blinks. Follow code 12 on page 5-26. • When more than one failure occurs, the MIL shows the blinks in the order of lowest number to highest number.