What is a spar in nautical terms?
A spar is a pole of wood, metal or lightweight materials such as carbon fibre used in the rigging of a sailing vessel to carry or support its sail. These include yards, booms, and masts, which serve both to deploy sail and resist compressive and bending forces, as well as the bowsprit and spinnaker pole.
What is the extension on the bow of a boat called?
The stem is the most forward part of a boat or ship’s bow and is an extension of the keel itself. It is often found on wooden boats or ships, but not exclusively.
What is a ship Bulwark?
Bulwark may refer to: Bulwark (nautical), a nautical term for the extension of a ship’s side above the level of a weather deck. Bastion, a structure projecting outward from the curtain wall of a fortification.
Is spar a mast?
The mast of a sailing vessel is a tall spar, or arrangement of spars, erected more or less vertically on the centre-line of a ship or boat. Such a section was known as a made mast, as opposed to sections formed from single pieces of timber, which were known as pole masts.
Where is the spar on a boat?
In sailing, a boom is a spar (pole), along the foot of a fore and aft rigged sail,[1] that greatly improves control of the angle and shape of the sail. The primary action of the boom is to keep the foot flatter when the sail angle is away from the centerline of the boat.
What is a stern on a boat?
Bow : Front of a boat. Stern : Rear of a boat. Starboard : Right side of a boat.
What is buttock line in ship?
Buttock-line meaning (aviation, ship-building) A curve indicating the shape of an airfoil or nautical equivalent in a vertical plane parallel to the longitudinal axis of the craft or vessel.
What is a scupper on a ship?
marine. Drains from decks to carry off accumulations of rainwater, condensation or seawater. Scuppers are located in the gutters or waterways, on open decks and connected to pipes usually leading overboard, and, in the corners of the enclosed decks to the bilge.
What does a spar cross on a sail mean?
a small pole or spar crossing a fore-and-aft sail diagonally from the mast to the upper aftermost corner, serving to extend the sail.
Which is the second largest anchor on a ship?
One of the principal anchors of a ship, normally the one used first; in the last several centuries, it was usually the second largest anchor and was carried on the starboard bow. Bill. The tip of the anchor’s palm; also called a pea, peak, or pick.
What are some nautical terms that sailors use?
With over 500 terms used to communicate with a captain, crew, and sailors regarding navigation and more, there’s a word for nearly everything. No need to jump ship, this comprehensive list will have you speaking the lingo in no time. Abaft the beam: A relative bearing of greater than 90 degrees from the bow. e.g. “two points abaft the port beam.”
What are the parts of an admiralty anchor?
A wooden, stone, or metal device that, when connected to a vessel with a cable or chain, was used to secure the vessel to the bed of a waterway to prevent it from drifting. Figure G-1. The parts of an Admiralty anchor.