What is the fuel to oil ratio for a Mercury outboard motor?

What is the fuel to oil ratio for a Mercury outboard motor?

As a general rule of thumb, add three ounces of Mercury 2 stroke premium outboard motor oil for each gallon of gas. Pour the gas and oil into a singular container. Close the gas container tightly and then shake the container vigorously to ensure that the oil and gasoline mix thoroughly.

What is the oil ratio for a 2 stroke Mercury outboard?

Valvoline 2 Stroke Outboard Oil is suitable for use in Evinrude, Mercury, Mariner, Suzuki, Volvo and Yamaha engines requiring 25:1, 50:1, 100:1, petrol/oil ratio, including those outboards with oil injection.

What is the oil to gas ratio for a 2 stroke outboard motor?

Use a 32:1 gasoline to oil ratio. One gallon of gasoline combined with 4 oz of two-cycle engine oil. If you are in the state of California, use a 2-cycle oil mix ratio of 40:1.

How much oil do I need to mix 50 1?

2.6 fluid ounces
For a 50:1 ratio of gas to oil, use 2.6 fluid ounces of oil per gallon of gas.

What kind of fuel does a Mercury outboard use?

Pre-Mix Models Fuel/oil ratio: 50:1 (50 parts fuel to 1 part oil) Oil requirement: – Certified TC-W3 2-Stroke Outboard Oil – Mercury or Quicksilver Premium 2-Cycle TC-W3 Outboard Oil

How much outboard motor oil for a gallon of gas?

As a general rule of thumb, add three ounces of Mercury 2 stroke premium outboard motor oil for each gallon of gas.

What kind of oil do you put in an outboard motor?

If you are using an older model two-stroke outboard motor, here is some advice for mixing fuel: As a general rule of thumb, add three ounces of Mercury 2 stroke premium outboard motor oil for each gallon of gas. Pour the gas and oil into a singular container.

What kind of oil does a Mercury autoblend use?

– Mercury or Quicksilver Premium Plus 2-Cycle TC-W3 Outboard Oil. Autoblend models have an oil reservoir mounted inside the boat that automatically blends oil with the fuel at a constant ratio of 50:1; 2-stroke oil is added to the reservoir and does not need to be mixed with the fuel (unless required for running-in)