What is the minimum thickness for rotors?
Since 2010, the 1.5mm minimum recommended rotor thickness has been printed on Shimano rotors. As for your specific rotors, that’s the least easy information to find.
How thick are Volvo brakes?
Pads can be worn to almost the nothing before needing replacment. Between 3mm – 5mm is the general rule.
What size rotors does my Volvo have?
Volvo built front rotors in 3 sizes for the XC90- 316mm, 328mm, and 336mm. A number of folks have tried over the years to get a solid “rule” about which vehicle gets which size as based on wheel size, engine, and MY. A few visual cues can help. If you have this damper on your front brakes, you have a 328mm rotor.
What kind of brakes does a Volvo 700 / 900 have?
[Editor’s Notes:] Volvo 700/900 series brakes came in a number of configurations: one-piece hub and rotor versus separate rotor and hub; solid versus ventilated rotors; various calipers for ABS and non-ABS; various rotor diameters and thicknesses.
When to replace the rotor on a car?
In the following chart, the “Absolute Minimum” thickness is the thickness at which replacement is mandatory. The “Minimum” thickness is used when you replace pads: if the measured rotor thickness at the points of pad contact is less than this number, replace the rotor.
What’s the minimum thickness to replace brake pads?
The “Minimum” thickness is used when you replace pads: if the measured rotor thickness at the points of pad contact is less than this number, replace the rotor. Conversion: 262.4mm= 10.5 inches; 280mm= 11 inches; 287mm= 11.25 inches. One inch =25.4mm.
Where is the product plate on a Volvo?
[Response: Paul Grimshaw] Refer to the product plate (located above passenger front headlight or in the trunk or door jamb). Go to position “E” (end of the second line on the right). The following codes apply: