What is the p0341 Honda camshaft position sensor?
P0341 Honda Description. The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. This information is used by the Engine Control Module(ECM) to control ignition and fuel injection.
What does the p0341 OBD-II trouble code mean?
What the P0341 code means P0341 is an OBD-II generic code that says the engine control module (ECM) detected the engine camshaft position sensor circuit is not within specifications. The sensor pulses do not correlate to the pulses of the crankshaft sensor. What causes the P0341 code?
What causes DTC p0341 on a Honda Element?
2003–2010 Element A damaged or stretched cam chain, resulting from infrequent oil changes, can cause the MIL to come on with DTC P0341 (CMP sensor A and CKP sensor incorrect phase detected). Old oil causes the cam chain to wear quickly. As a result, it stretches beyond the point where the cam chain auto-tensioner can keep up.
Why is my DTC p0341 CMP sensor not working?
Depending on year, make, and model, DTC P0341 or P0346 may have number of causes. Here are some of the most common. Faulty Sensor – If the sensor coil is open or shorted, then it will generate no signal. Poor Installation – A good CMP signal is highly dependent on placement.
What is the p0341 code for Camshaft Position Sensor?
P0341 code is triggered when the powertrain control module (PCM) detects a problem with the signal being sent by the camshaft position sensor. To learn more about how the ECM/PCM uses signals from the CMP, you can read our in-depth explanation here.
How to diagnose p0341 on a 2009 VW?
P0341 Code: Camshaft Position Sensor ”A” Circuit Range/Performance (Bank 1 or Single Sensor) – In The Garage with CarParts.com How to diagnose P0341 on a 2009 VW CC
How to fix and clear OBD-II trouble code p0341?
Often replacing the camshaft sensor fixes trouble code P0341, however it is important to check the following first: Inspect the wiring at the camshaft sensor for melting or marks of corrosion Inspect the camshaft reluctor wheel for missing or damaged teeth.
2003–2010 Element A damaged or stretched cam chain, resulting from infrequent oil changes, can cause the MIL to come on with DTC P0341 (CMP sensor A and CKP sensor incorrect phase detected). Old oil causes the cam chain to wear quickly. As a result, it stretches beyond the point where the cam chain auto-tensioner can keep up.
What does the CPS code p0341 mean?
What does this mean? This P0341 Honda code basically means that the powertrain control module (PCM) detected a problem with the camshaft signal. The camshaft position sensor (CPS) sends a specific signal to the PCM for Top Dead Center on the compression stroke as well as signals indicating the position of the cam sensor.
What does a bad camshaft position sensor code mean?
Once your car’s computer detects a CMP sensor failure, it will trigger the engine light and store a diagnostic trouble code (DTC) in its memory (see the table below for common camshaft position sensor trouble diagnostic codes). IV. CMP Codes and What They Mean
What does OBD code p0341 mean on Honda?
OBD2 Code P0341 Honda definition: This P0341 Honda code basically means that the powertrain control module (PCM) detected a problem with the camshaft signal. The camshaft position sensor (CPS) sends a specific signal to the PCM for Top Dead Center on the compression stroke as well as signals indicating the position of the cam sensor.
What causes an OBDII code on a Honda?
P0341 HONDA Possible Causes 1 Faulty Camshaft Position Sensor 2 Camshaft Position Sensor harness is open or shorted 3 Camshaft Position Sensor circuit poor electrical connection 4 Faulty starter motor 5 Starting system circuit 6 Dead (Weak) battery
What is the OBD code for a Honda camshaft?
OBD2 Code P0341 Honda definition: This P0341 Honda code basically means that the powertrain control module (PCM) detected a problem with the camshaft signal.
What does the camshaft position sensor on a Honda do?
P0341 HONDA Description The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. This information is used by the Engine Control Module (ECM) to control ignition and fuel injection.
P0341 HONDA Description The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. This information is used by the Engine Control Module (ECM) to control ignition and fuel injection.
What causes the p0340 CMP sensor to malfunction?
P0340 – Camshaft position (CMP) sensor A, bank 1 circuit malfunction Trouble Code Fault Location Probable Cause P0340 Camshaft position (CMP) sensor A, bank 1 Wiring, CMP sensor, ECM
Where is Bank 1 sensor 2 located on a 2005 Honda?
Re: Where is bank 1 sensor 2 located on a 2005 honda… 4 or 6 cylinder engine. It’s the rear O2 sensor,the one behind the catalytic converter. Clear the code with OBDII scanner or remove negative cable for 2 minutes. Wait until the exhaust cool for 1 hours
P0341 Honda Description. The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. This information is used by the Engine Control Module(ECM) to control ignition and fuel injection.
What can cause the camshaft position sensor ( CKP ) signal to be out of range?
The trouble code P0341 is set when the camshaft position sensor (CMP) signal is out of expected range or if it is not timed properly with the crankshaft position sensor (CKP) signal. What can cause the code P0341:
What does this mean? This P0341 Honda code basically means that the powertrain control module (PCM) detected a problem with the camshaft signal. The camshaft position sensor (CPS) sends a specific signal to the PCM for Top Dead Center on the compression stroke as well as signals indicating the position of the cam sensor.
What are the possible causes of the p0341 code?
P0341 Possible Causes 1 Faulty Camshaft Position Sensor 2 Camshaft Position Sensor harness is open or shorted 3 Camshaft Position Sensor circuit poor electrical connection 4 Faulty starter motor 5 Starting system circuit 6 Dead (Weak) battery
P0341 HONDA Possible Causes 1 Faulty Camshaft Position Sensor 2 Camshaft Position Sensor harness is open or shorted 3 Camshaft Position Sensor circuit poor electrical connection 4 Faulty starter motor 5 Starting system circuit 6 Dead (Weak) battery
Why do I have a DTC p0341 engine light?
As a result, it stretches beyond the point where the cam chain auto-tensioner can keep up. That extra chain slack causes the valve timing control (VTC) actuator and the exhaust camshaft sprocket to lag behind, and you wind up with DTC P0341.
What is the diagnostic code for Camshaft Position Sensor?
Cost of diagnosing the P0341 code P0341 is a diagnostic trouble code (DTC) for “Camshaft Position Sensor Circuit Range/Performance”. This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation.
What does a bad camshaft sensor do?
At low speeds a bad camshaft sensor will cause the car’s engine to stall. The engine may also experience an inability to turn over, resulting in the car not starting.
How much does it cost to replace a camshaft sensor?
Additional costs will be for the other engine parts that will support the camshaft and engine. A camshaft position sensor, which may be needed or replaced, can can cost $100 to $350 for the part.
Where is the cam position sensor located?
The camshaft position sensor is either located near the top of the engine, passenger-s side, or on the right side of the engine near the ignition coils. The camshaft position sensor is located on the engine near the camshaft pulley.
What does a cam position sensor do?
The CAM sensor or camshaft position sensor’s role is to signal the ECM the camshaft position. The crank and cam sensor operates in sync with eachother. The CAM sensor is frequently used in determining which injector to fire in a sequential system and for the COP or coil on-plug ignition systems coil firing event.