What kind of engine does a Cadillac 425 have?

What kind of engine does a Cadillac 425 have?

The new engine was also 100 lb (45 kg) lighter. The 425 was offered in L33 form, with a four-barrel carburetor, producing 180 hp (134 kW) at 4000 rpm and 320 lb⋅ft (434 N⋅m) of torque at 2000 rpm, and L35 with electronic multi-port fuel injection for 195 hp (145 kW) and 320 lb⋅ft (434 N⋅m) of torque, but peaked at 2400 rpm.

How to tell if a Cadillac engine is 368 or 472?

One easy way to identify a 425 or 368 vs a 472 or 500 Cadillac engine block is to look at the rear of the block. The 2 smaller engines have a ‘box’ shape cast in near the oil pressure port, which makes identifying them at a glance fairly easy.

Where is the 500 crank number on a Cadillac engine?

Crank ID: 500 crank casting numbers are usually next to the 2nd or 4th main journal. 472s are usually on the 3rd counterweight. The 425 and 368 crank is the same stroke as the 472 crank, and is physically interchangeable, but this is not recommended due to balancing and weakness issues.

How can you tell if a Cadillac engine is a street engine?

Fine for a mild street engine, but unacceptable for a serious performance engine. One easy way to identify a 425 or 368 vs a 472 or 500 Cadillac engine block is to look at the rear of the block. The 2 smaller engines have a ‘box’ shape cast in near the oil pressure port, which makes identifying them at a glance fairly easy.

The new engine was also 100 lb (45 kg) lighter. The 425 was offered in L33 form, with a four-barrel carburetor, producing 180 hp (134 kW) at 4000 rpm and 320 lb⋅ft (434 N⋅m) of torque at 2000 rpm, and L35 with electronic multi-port fuel injection for 195 hp (145 kW) and 320 lb⋅ft (434 N⋅m) of torque, but peaked at 2400 rpm.

How big is the V-8 engine in a Cadillac?

When Cadillacdebuted its new creation in the 1968 models, the V-8 was produced with a 4.30-inch bore and 4.06-inch stroke to yield 472 cubic inches (7.7 liters), the largest passenger car engine in the industry. With 10.5:1 compression, it produced 375hp and 525-lbs ft of torque when it was introduced.

Which is the best Cadillac long stroke engine?

The high deck 425 followed for 1965 in which the 455 was derived. The 307 was the only long stroke engine of this family, thus it had good low end torque, fuel economy and emissions qualities.

What kind of engine did Cadillac have in 1928?

Cadillac created a new V8, the 341, for 1928. It was a 341 cu in (5.6 L) engine and produced 90 hp (67 kW). The same year saw the introduction of the synchromesh transmission. This engine was used in the Series 341 and 341B cars of 1928 and 1929.