What size are Honda Fit windshield wipers?

What size are Honda Fit windshield wipers?

Honda Fit (2009-2013) Wiper Blade Kit – Set Includes 28″ (Driver Side), 14″ (Passenger Side), 14B” (Rear Blade) (3 Blades Total)

How do you put the wiper fluid in a Honda Fit?

Honda Fit: Refilling Window Washer Fluid Look for 1/2 mark on the reservoir. If the level is low, fill the washer reservoir. If the washer fluid is low, the indicator appears on the instrument panel. Pour the washer fluid carefully.

Can you change the insert on a Honda wiper blade?

Honda wiper blades are designed so you can replace only the rubber insert and not have to change the whole blade. This makes replacement quick and cost-effective. Your Honda dealer can provide and install the proper sizes of Genuine Honda rubber inserts for your wiper blades.

How do you remove the windshield wiper arm from a car?

The windshield wiper arm attaches to your vehicle via a single retaining nut just below the windshield; remove the windshield wiper arm by using pliers or a vise-grip to take off the nut and then pull off the windshield wiper arm.

When is it time to replace a wiper blade?

If you find sections of a blade’s rubber insert missing or torn, or it is leaving a streak or not clearing moisture from the glass efficiently, it is time for replacement.

2019 Honda Fit Windshield Wiper Size The 2019 Honda Fit has a 26″ driver’s wiper blade , a 14″ passenger’s wiper blade and a 14″ rear wiper.

What size windshield wipers do I need for a 2008 Honda Fit?

Honda Fit Wiper Size Chart

Year Driver Side Passenger Side
2010 26″ or 28″ 13″ or 14″
2009 26″ or 28″ 13″ or 14″
2008 24″ 14″ or 16″
2007 24″ 14″ or 16″

How do you remove the rear wiper on a Honda Fit?

  1. Release the old blade. Lift the wiper arm off the window.
  2. Remove the wiper. The blade will release from the wiper arm.
  3. Position the new blade. Place the small bar attachment on the new wiper blade into the hook on the wiper arm.
  4. Lock the blade into place. Rotate the blade away from you and it will snap into place.
  5. Done!

How do I change the wiper blades on a Honda Fit?

Slide the blade assembly toward the lock tab until it releases from the wiper arm. When replacing a wiper blade, make sure not to drop the wiper blade or wiper arm down on the windshield. Remove the blade from its holder by grasping the tabbed end of the blade. Pull firmly until the tabs come out of the holder.

How do you put a wiper on a Honda Fit?

Start on the driver’s side of your Fit. Most blades are held in place with a tiny clip. Push that clip up towards the arm and push the blade backwards, as if you were sliding it down the wiper arm.

How do you change the wiper blades on a 2008 Honda Fit?