When was the last time I serviced my Eurovan?

When was the last time I serviced my Eurovan?

2003 Volkswagen EuroVan MV SERVICING – A/T 4 января 2005 г. 1:05:09 Page 1 © 2004 Mitchell Repair Information Company, LLC. CHECKING FLUID LEVELS

What is the oil pan gasket on a Eurovan?

2001-03 AUTOMATIC TRANSMISSIONS Servicing – Eurovan 2001-03 AUTOMATIC TRANSMISSIONS Servicing – Eurovan APPLICATION TRANSAXLE APPLICATION IDENTIFICATION OIL PAN GASKET Fig. 1: Identifying Oil Pan Gasket (01P) Courtesy of VOLKSWAGEN UNITED STATES, INC. LUBRICATION SERVICE INTERVALS Transaxle Check fluid level at 20,000 mile intervals.

How to change the ATF temperature on a Eurovan?

Connect vehicle diagnostic, testing and information system VAS 5051. Select “08 – read measured value blocks” on the touch screen. Select display group 005 via “Measured value block” and “Change display group number”. The first display zone shows the ATF temperature.

How often do you change fluid on a Eurovan transaxle?

Check fluid level at 20,000 mile intervals. Fluid is filled for life except on transaxle with code EQJ. No changing is required. On transaxles with code EQJ, replace fluid every 40,000 miles. Final Drive Check fluid level at 40,000 mile intervals. Fluid is filled for life. No changing is required.

What is the transaxle code for a Eurovan?

2001-03 AUTOMATIC TRANSMISSIONS Servicing – Eurovan APPLICATION TRANSAXLE APPLICATION IDENTIFICATION OIL PAN GASKET Fig. 1: Identifying Oil Pan Gasket (01P) Courtesy of VOLKSWAGEN UNITED STATES, INC. LUBRICATION SERVICE INTERVALS Transaxle Check fluid level at 20,000 mile intervals. Fluid is filled for life except on transaxle with code EQJ.

What kind of transaxle does a Eurovan have?

Application Transaxle Model Eurovan 01P 2003 Volkswagen EuroVan MV SERVICING – A/T 4 января 2005 г. 1:05:09 Page 1 © 2004 Mitchell Repair Information Company, LLC. CHECKING FLUID LEVELS

What should the ATF be on a Eurovan?

1. Prior to checking ATF level, ensure all fuses are okay. Battery voltage must be at least 11.5 volts. Ground connections on engine, transaxle and body must be okay. All electrical components must be switched off. Transaxle ATF temperature must not be above about 86°F (30°C).